CFRP board drilling performance studying for carbide drill bit with DLC coating

doi:10.16731/j.cnki.1671-3133.2024.12.014

Abstract

Abstract: The drill bit for carbon fiber reinforced plastics machining facing the issues like short running life and bad machining quality.Carbide drill bits with DLC coating would be a good solution to increase the life of drill bits which with lower frictional coefficient and higher surface hardness. 4 groups of samples had been studied like uncoated carbide drill bits,monolayer DLC coating,Cr/W-DLC/DLC and Cr/CrN/DLC composite coating. By comparing the frictional coefficient,surface hardness and roughness of different coatings,the data showed that all the drill bits with DLC coating had advantage of low frictional coefficient and could improve the surface roughness.The data of cutting torque force,cutting temperature,cutting speed and frank wear from 4 groups of samples' drilling testing showed that the composite coating of Cr/CrN/DLC provided best service life and much more stable performance,its service life was 2.65 times of the drills without coating.

Key words: CFRP, carbide drill bit, DLC composite coating, cutting performance

CLC Number:

TQ327.3

WANG Yang, YANG Lanjie. CFRP board drilling performance studying for carbide drill bit with DLC coating[J]. Modern Manufacturing Engineering, 2024, 531(12): 108-113.

References

[1] 陈林山,陈翔.塑料与复合材料在汽车轻量化设计中的应用[J].塑料工业,2017,45(7):103-106.
[2] 郝甜妹,杜劲,张静婕,等.Cr/x/DLC复合涂层刀具切削铝硅合金切削性能研究[J].现代制造工程,2020(7):1-5,76.
[3] 刘杰,朱水生,肖晓兰.AlCrSiN涂层刀具干车削Ti-6Al-4V钛合金的切削性能研究[J].广东工业大学学报,2021,2(8):99-106.
[4] 杜昊,田霰,戴厚富.AlTiCrN-DLC涂层刀具对Inconel 718高温合金的切削性能研究[J].工具技术,2019,53(5):37-41.
[5] 杜昊,陈宁,胡恒宁,等.硬质合金表面SiC/DLC涂层组织和性能研究[J].工具技术,2018,52(1):16-21.
[6] 张厚江.高速钻削碳纤维复合材料钻削力的研究[J].航空制造技术,2006(12):76-79,82.
[7] 林伟,涂俊翔.高速钻削碳纤维复合材料加工参数对入口分层的影响研究[J].现代制造工程,2015(2):12-17.
[8] KARNIK S R,PAULO D J,CAMPOS R J.Delamination analysis in high speed drilling of Carbon Fiber Reinforced Plastics (CFRP) using artificial neural network model[J]. Materials & Design,2008,29(9):25-26.
[9] PAULO D J,PEDRO R. Study of delamination in drilling Carbon Fiber Reinforced Plastics(CFRP)using design experiments[J].Composite Structures,2003,59(4):481-487.
[10] 张秀丽,尹忠慰,郭前建.轴表面DLC涂层对滑动轴承润滑承载性能的影响[J].润滑与密封,2021,8(7):26-31,61.
[11] 宿友亮,孟志坚,郜雪楠,等.CFRP切削加工中刀具磨损研究进展[J].表面技术,2023,52(8):27-48.
[12] 石文天,王林,李杰,等.基于MQL的碳纤维复合材料制孔表面质量及切削力试验[J].表面技术,2023,52(5):235-246.
[13] 王福吉,钱宝伟,成德,等.钻削CFRP的双顶角钻头磨损及抑制新方法[J].机械工程学报,2018,54(15):171-179.
[14] 孟庆勋.CFRP制孔损伤机理及钻头结构改型方法研究[D].西安:西北工业大学,2018.
[15] 邹财勇,石广兴,李杰,等.典型结构钻头钻削正交编织CFRP轴向切削力及制孔质量研究[J].复合材料科学与工程,2022(6):99-104.
[16] 江子厚,邓阳,王成勇,等.类金刚石刀具涂层研究进展[J].工具技术,2023(11):3-14.
[17] 范其香,林静,王铁钢.刀具涂层材料的最新研究进展[J].表面技术,2022,51(2):1-19,28.
[18] 袁松梅,陈博川,邵梦博.微小孔钻削刀具制造技术研究进展综述[J].机械工程学报,2023,59(3):265-282.