Research on engineering change risk communication basing on Hub nodes of complex product design network

doi:10.16731/j.cnki.1671-3133.2018.06.005

Abstract

Abstract: Engineering change propagation brings risks to the operation of the project,in order to control risks of complex product engineering change,basing on the complex product design network,the structure matrix of complex product design network is constructed and the mechanism of engineering change propagation is analyzed.The nodes in the complex product design network are screened in order to obtain the Hub nodes.From the two perspectives of the direct and indirect effects of Hub nodes in the design network,the risk analysis model of complex product engineering change is constructed.Finally,the rationality of the proposed method is verified by the model HFC6564-84K marine generator.

Key words: complex product, Hub nodes, change propagation probability, change risk

CLC Number:

C939

Su Xiang, Yu Yunpeng, Yu Zhenwei, Wang Zhiying, Wu Fengpei. Research on engineering change risk communication basing on Hub nodes of complex product design network[J]. Modern Manufacturing Engineering, 2018, 453(6): 23-31.

References

[1] TERWIESCH C,LOCH C H.Managing the process of engineering change orders:the case of the climate control system in automobile development[J].Journal of Product Innovation Management,1999,16(2):160-172.
[2] JARRATT T A W,ECKERT C M,CALDWELL N H M,et al.Engineering change:an overview and perspective on the literature[J].Research in Engineering Design,2011,22(2):103-124.
[3] 王际坤,魏法杰.工程变更影响分析与评估研究[J].工业工程,2006,9(3):32-35.
[4] 柏彦春,于勇,范玉青,等.工程更改在飞机项目中的应用[J].航空制造技术,2003(9):34-37.
[5] 何睿,唐敦兵,薛建彬.基于设计结构矩阵的工程变更传播研究[J].计算机集成制造系统,2008(4):656-660.
[6] 何睿.基于设计结构矩阵的工程变更管理系统的研究与开发[D].南京:南京航空航天大学,2008.
[7] 唐敦兵,徐荣华,唐吉成,等.基于设计结构矩阵的工程变更影响分析[J].机械工程学报,2010(1):154-161.
[8] CLARKSON P J,SIMOMS C,ECKERT C.Predicting change propagation in complex design [J].Computers in Industry,2010,61(1):15-28.
[9] STEWARD D V.The design structure system:a method for managing the design of complex systems[J].IEEE Transactions on Engineering Management,1981,28(3):71-74.
[10] LI S,CHEN L.Towards rapid redesign pattern based redesign planning for large-scale and complex redesign problems[J].Journal of Mechanical Design,2007,129(2):227-223.
[11] 刘书勇,吴艳霞,张博为,等.基于可重构计算系统的矩阵三角化分解硬件并行结构研究[J].电子学报,2015(8):1642-1650.
[12] 宫中伟,莫蓉,杨海成,等.基于产品开发网络Hub节点的工程变更[J].计算机集成制造系统,2012(1):40-46.
[13] 陈李慧.有向加权复杂网络关键节点识别及稳定性研究[D].南京:南京理工大学,2014.
[14] 王晓磊,杨岳湘,何杰.基于流量统计的P2P网络关键节点识别[J].计算机应用研究,2015(5):1445-1449.
[15] 黄海滨,邵平.基于拓扑结构的生物网络关键节点识别研究进展[J].玉林师范学院学报,2009(3):6-10.
[16] 方平,李芝棠,涂浩,等.复杂网络局部社区挖掘的节点接近度算法[J].计算机工程与应用,2013(17):38-42.
[17] 张珍,张振宇,宋蔓蔓.一种基于最短路径介数的重要节点发现算法[J].计算机工程与应用,2013(21):98-100,132.
[18] 李宠.复杂网络机制模型和重要节点挖掘算法研究[D].哈尔滨:哈尔滨工程大学,2013.
[19] 付赟.基于DSM的软件需求变更传播风险分析[J].计算机工程与应用,2012(29):22-28.
[20] 杨欢.软件需求变更的影响因素和控制管理研究[D].上海:华东理工大学,2012.
[21] 宫中伟,莫蓉,杨海成,等.基于矩阵的工程变更雪崩传播预测方法[J].计算机集成制造系统,2012(12):2619-2627.
[22] 方俊.建设项目工程变更的管理与控制[J].建筑经济,2004(10):54-58.
[23] 刘清华,万立,钟毅芳.工程变更管理的分析与研究[J].计算机集成制造系统,2000(6):31-36.
[24] 裘乐淼,张树有,徐春伟,等.基于动态设计结构矩阵的复杂产品配置过程规划技术[J].机械工程学报,2010(7):136-141,147.
[25] 郭传龙,裘乐淼,张树有,等.基于耦合强度设计结构矩阵的复杂产品配置模型优化及应用[J].计算机集成制造系统,2012(4):673-683.