The structural reliability optimization design of wind turbine’s main shaft considering the randomness of geometry dimensions

doi:10.16731/j.cnki.1671-3133.2018.12.015

Abstract

Abstract: Based on ANSYS parametric design language APDL,the parametric finite element model of wind turbine main shaft was established with taking the structural dimension parameter as the variable.At the same time,the finite element analysis command file of main shaft was compiled.On this basis,the DOE(Design of Experiment) for main shaft was executed by using ISIGHT combined ANSYS,and the influence of the dimension parameters on the maximum working stress of main shaft was gained.The 5 dimension parameters which have greater influence on the maximum working stress of main shaft were selected and a two order response surface model for the parameters selected and the maximum working stress was built by using the approximate modeling function of ISIGHT.According to the response surface model gained,the static strength reliability computation program of main shaft was compiled by MATLAB.Finally,on the basic of ensuring the structural reliability level meets the requirement,the dimension optimized design of main shaft was carried out through the optimization module of ISIGHT.The optimization results showed that the optimization effect of the MISQP optimization algorithm was the best, and the volume of wind turbine shaft was reduced by 2.47 %.

Key words: main shaft of wind turbine, ANSYS software, parametric modeling, ISIGHT software, reliability-based optimization design

CLC Number:

TM315

Zhou Xinjian, Mao Le, Li Zhiqiang. The structural reliability optimization design of wind turbine’s main shaft considering the randomness of geometry dimensions[J]. Modern Manufacturing Engineering, 2018, 459(12): 89-96.

References

[1] 吕霞宙,宋述芳,李洪双,等.结构机构可靠性及可靠性灵敏度分析[M].北京:科学出版社,2009.
[2] 张义民.机械可靠性设计的内涵与递进[J].机械工程学报,2010,46(14):167-188.
[3] 中国机械行业联合会.JB/T10300—2001 风力发电机组设计要求[S].北京:中国标准出版社,2001.
[4] 吴佳梁.风力机可靠性工程[M].北京:化学工业出版社,2011.
[5] 韩德海.风力发电机组主轴系统的结构分析研究[D].重庆:重庆大学,2009.
[6] 杜静,周宏丽,何章涛,等.风力发电机主轴结构强度分析[J].现代科学仪器,2011(5):68-72.
[7] 萨仁高娃.大型风力发电机组主轴载荷分析及疲劳寿命研究[D].太原:太原理工大学,2014.
[8] 杜翠.2MW风力发电机关键部件有限元分析及优化设计[D].西安:陕西科技大学,2011.
[9] 路永品.风力发电机主轴数值计算及故障预测研究[D].合肥:合肥工业大学,2013.
[10] 蒋彦收.高速电主轴可靠性分析与研究[D].沈阳:东北大学,2011.
[11] 张义民,王昊,曹辉,等.基于有限元法的数控车床主轴系统频率可靠性分析[J].东北大学学报(自然科学版),2015,36(8):1155-1159.
[12] 覃才友,黄娟,李小汝.基于概率有限元法对核电轮槽铣床主轴的可靠性分析[J].组合机床与自动化加工技术,2014(5):23-26.
[13] WU X Y,OUYANG G Y,LI Y X.Design and Optimization of Injector Structure in Diesel Engine Based on ISIGHT Platform DOE Methods[J].Advanced Materials Research,2011(335/336):1376-1380.
[14] 胡文婕,陈亮.基于iSIGHT的汽车盘式制动器多学科设计优化[J].农业机械学报,2010,41(5):17-20.
[15] 王想生,赵彬,李永刚,等.基于ISIGHT/NASTRAN的机翼翼梁的结构优化设计[J].飞机设计,2008,28(4):23-27.
[16] 夏风云.基于ISIGHT的参数化叶轮可靠性及可靠性灵敏度设计[D].沈阳:东北大学,2011.
[17] 谭立娟.结构可靠性分析及基于响应面法的工程应用研究[D].济南:山东大学,2010.
[18] 段巍,王璋奇.基于响应面方法的汽轮机叶片概率强度设计及敏感性分析[J].中国电机工程学报,2007,27(5):99-104.
[19] YOON G L,KIM K J,HONG Y K.Reliability Analysis of Monopile for a Offshore Wind Turbine Using Response Surface Method[J].Journal of the Korean Society of Civil Engineers,2013,33(6):2402-2407.
[20] 乔红威,吕震宙,赵新攀.基于随机响应面法的可靠性灵敏度分析及可靠性优化设计[J].计算力学学报,2010,27(2):207-212.