现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 59-67.doi: 10.16731/j.cnki.1671-3133.2026.09.007

• 车辆工程制造技术 • 上一篇    下一篇

融合稳定性的分布式智能汽车模糊MPC路径跟踪控制策略

程广伟1,2, 马向前1, 王永巍2, 杨立栋1   

  1. 1 河南科技大学车辆与交通工程学院,洛阳 471003;
    2 洛阳理工学院智能车辆工程学院,洛阳 471023
  • 收稿日期:2025-10-13 出版日期:2026-09-18 发布日期:2026-10-22
  • 通讯作者: 程广伟,博士研究生,教授,主要研究方向为车辆自动驾驶技术、现代车辆测试技术及装备。E-mail:aqian806@163.com
  • 作者简介:马向前,硕士研究生,主要研究方向为分布式智能车辆路径跟踪。王永巍,博士研究生,讲师,主要研究方向为永磁同步电机控制和分布式智能车辆。杨立栋,硕士研究生,主要研究方向为分布式智能车辆状态参数与路面附着系数联合估计。

Fuzzy MPC path tracking control for distributed-drive intelligent vehicles with integrated stability

CHENG Guangwei1,2, MA Xiangqian1, WANG Yongwei2, YANG Lidong1   

  1. 1 School of Intelligent Vehicle Engineering,Henan University of Science and Technology,Luoyang 471003,China;
    2 School of Intelligent Vehicle Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China
  • Received:2025-10-13 Online:2026-09-18 Published:2026-10-22

摘要: 为提升分布式智能汽车在高速与低附着路面工况下的路径跟踪性能与横向稳定性,提出了一种融合稳定性的分布式智能汽车模糊模型预测控制(Model Predictive Control,MPC)路径跟踪控制策略,该方法构建路径跟踪控制、稳定性控制与驱动力矩分配共3层架构:在路径跟踪控制层,通过模糊变权重实现了MPC权重系数自适应调整,以提升对多变行驶工况的适应性;在稳定性控制层,利用线性二次型调节器(Linear Quadratic Regulator,LQR)控制器计算附加横摆力矩;在驱动力矩分配层,以降低轮胎利用率为优化目标,实现驱动力矩的合理分配。CarSim-MATLAB/Simulink软件联合仿真结果表明,融合稳定性的分布式智能汽车模糊MPC路径跟踪控制策略在高速与低附着路面工况下显著提升了路径跟踪精度与横向稳定性,验证了该方法的有效性。

关键词: 分布式智能汽车, 路径跟踪, 模型预测控制, 自适应, 横向稳定性

Abstract: To improve the path-tracking performance and lateral stability of distributed-drive intelligent vehicles under high-speed and low-adhesion conditions, a stability-integrated fuzzy Model Predictive Control (MPC) strategy is proposed. A three-layer hierarchical control architecture is developed, including a path-tracking layer, a stability control layer, and a driving torque allocation layer. In the path-tracking layer, a fuzzy variable-weight method is used to adaptively tune the MPC weighting coefficients to enhance adaptability to varying driving conditions. In the stability control layer, a Linear Quadratic Regulator (LQR) is adopted to generate the additional yaw moment for vehicle stabilization. In the torque allocation layer, the driving torques are optimally distributed by minimizing tire utilization. CarSim-MATLAB/Simulink co-simulation results show that the proposed method effectively improves both path-tracking accuracy and lateral stability under high-speed and low-adhesion conditions, demonstrat-ing its effectiveness.

Key words: distributed-drive intelligent vehicles, path tracking, Model Predictive Control(MPC), adaptive, lateral stability

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn