现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 54-65.doi: 10.16731/j.cnki.1671-3133.2026.10.007

• 机器人技术 • 上一篇    下一篇

基于PSSR结构的连杆传动型欠驱动仿人灵巧手指设计及其运动学分析*

高雪1, 周致远2, 毛德生3   

  1. 1 常州工业职业技术学院智能控制学院,常州 213164;
    2 东南大学电气工程学院,南京 210096;
    3 比亚迪汽车工业有限公司汽车工程研究院,深圳 518118
  • 收稿日期:2025-12-01 出版日期:2026-10-18 发布日期:2026-11-05
  • 作者简介:高雪,硕士,副教授,主要研究方向为机器人设计、嵌入式系统与智能控制等。E-mail:TG_112138@163.com
  • 基金资助:
    *国家自然科学基金项目(12204097)

Design and kinematic analysis of underactuated humanoid dexterous fingers with linkage-transmission based on PSSR structure

Gao Xue1, Zhou Zhiyuan2, Mao Desheng3   

  1. 1 School of Intelligent Control,Changzhou Institute of Industry Technology,Changzhou 213164,China;
    2 School of Electrical Engineering,Southeast University,Nanjing 210096,China;
    3 Automotive Engineering Research Institute,BYD Automotive Industry Co., Ltd., Shenzhen 518118,China
  • Received:2025-12-01 Online:2026-10-18 Published:2026-11-05

摘要: 针对肌腱传动型仿人灵巧手指难以进行双向控制、传动效率低,以及传统连杆传动型欠驱动灵巧手指尖位置与速度难以精准控制的问题,对灵巧手指结构设计、指尖位置与微分运动学等方面进行了研究。首先,设计了一种基于棱柱-球形-球形-旋转(Prismatic-Spherical-Spherical-Revolute,PSSR)与交叉四连杆结构的新型3自由度欠驱动灵巧手食指;进一步,依据所设计的手指结构,系统性地构建了各指节及指尖与驱动单元间的位置与微分运动学正、逆解析映射关系,得出了关键的指尖线速度雅可比矩阵;最后,通过仿真进行了相关验证。结果表明,所设计的仿人灵巧手食指机构的掌指关节能够在[-35°,35°]范围内进行外展和内收,其余指关节能够实现与人体指关节相同的[-90°,0°]范围屈伸;此外,通过对各关节独立运动及指尖轨迹与速度跟踪性能仿真可知,所构建的运动学映射关系模型具有合理性。

关键词: 欠驱动灵巧手, 连杆传动, 雅可比矩阵, 任务空间, 指尖运动学

Abstract: Aiming at the issues of bidirectional control difficulty,low transmission efficiency of tendon-driven humanoid dexterous fingers,and the difficulty in precisely controlling the position and velocity of the fingertip in traditional linkage-transmission underactuated dexterous fingers,research on the structural design,fingertip position and differential kinematics of dexterous fingers was conducted. Firstly,a novel 3-DOF underactuated dexterous index finger based on a Prismatic-Spherical-Spherical-Revolute (PSSR) and cross four-bar linkage structure was designed. Subsequently,based on the designed finger structure,the forward and inverse analytical mapping relationships of position and differential kinematics between each phalanx and fingertip and the driving unit were systematically established,and the key Jacobian matrix of the fingertip linear velocity was obtained. Finally,relevant verification was conducted through simulations. The results showed that the metacarpophalangeal joint of the designed humanoid dexterous index finger could perform abduction and adduction within the range of [-35°,35°],and the other finger joints could achieve the same [-90°,0°] range of flexion and extension as human finger joints. In addition,through the simulation of independent motion of each joint and fingertip trajectory and velocity tracking performance,it was shown that the established kinematic mapping relationship models were reasonable.

Key words: underactuated dexterous hand, linkage-transmission, Jacobian matrix, reachable workspace, fingertip kinematics

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn