现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 128-135.doi: 10.16731/j.cnki.1671-3133.2026.09.015

• 仪器仪表/检测/监控 • 上一篇    下一篇

光电差动式自动触发测头设计与实现

李昆1,2, 崔派1, 李云玲3, 张涛1, 王爱军1   

  1. 1 航空工业北京长城计量测试技术研究所,北京 100095;
    2 北京理工大学光电学院,北京 100081;
    3 内蒙古北方重工业集团有限公司,包头 014030
  • 收稿日期:2025-11-24 出版日期:2026-09-18 发布日期:2026-10-22
  • 作者简介:李昆,硕士,高级工程师,主要研究方向为几何量计量技术与仪器开发。E-mail:likun2503@126.com

Design and implementation of an auto-trigger probe based on photoelectric differential principle

LI Kun1,2, CUI Pai1, LI Yunling3, ZHANG Tao1, WANG Aijun1   

  1. 1 AVIC Changcheng Institute of Metrology & Measurement,Beijing 100095,China;
    2 School of Optical and Photonics,Beijing Institute of Technology,Beijing 100081,China;
    3 Inner Mongolia North Heavy Industries Group Co.,Ltd.,Baotou 014030,China
  • Received:2025-11-24 Online:2026-09-18 Published:2026-10-22

摘要: 针对当前高精度测力传感器式触发测头存在的技术垄断、成本高昂以及传统杠杆式测头精度与重复性不足的问题,提出并设计了一种基于光电差动原理的自动触发测头。该测头采用一级滑动机构与二级滑动机构的差动组合结构,通过精密交叉滚子轴承和V型轴承保证运动的直线性与稳定性;利用测力平衡单元为整个系统构建初始平衡状态,并在测针接触工件后打破平衡,引发两级滑动机构间的微小相对位移;集成光栅传感器的光电测量模块实时检测该位移量,当达到预设阈值时输出高精度触发信号。详细阐述了测头的机械结构设计、工作原理及关键组件实现方法。进行实验测试与分析,结果表明,该测头触发重复性精度优于1 μm,具有结构简单、成本低、稳定性好及重复性高等优点,可满足高精度测长、测高类几何量测量设备的瞄准信号指标要求,打破了国外技术垄断,为我国高端装备制造业的精密测量提供了有效的技术支撑。

关键词: 触发测头, 光电差动, 高精度测量, 几何量测量, 光栅传感器, 重复性

Abstract: To address the issues of technical monopoly,high cost associated with high-precision force-sensor-based trigger probes,and the insufficient accuracy and repeatability of traditional lever-style probes,an auto-trigger probe based on the photoelectric differential principle has been proposed and designed. This probe employs a differential combination structure of a primary sliding mechanism and a secondary sliding mechanism,ensuring motion linearity and stability through precision cross roller bearings and V-type bearings. A force balance unit provides the initial equilibrium state for the entire system,which is disrupted when the probe tip contacts the workpiece,inducing minute relative displacement between the two sliding mechanisms. An integrated photoelectric trigger module,composed of a grating sensor,detects this displacement in real-time and outputs a high-precision trigger signal when a preset threshold is reached. The mechanical structure design,working principle,and implementation methods of key components are elaborated in detail. Experimental tests and analysis show that the probe achieves a trigger repeatability accuracy better than 0.1 μm. It offers advantages such as simple structure,low cost,good stability,and high repeatability,meeting the requirements for targeting signals in high-precision length and height geometric measurement equipment. This development breaks the foreign technological monopoly and provides effective technical support for precision measurement in China's high-end equipment manufacturing industry.

Key words: trigger probe, photoelectric differential, high-precision measurement, geometric measurement, grating sensor, repeatability

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn