现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 1-8.doi: 10.16731/j.cnki.1671-3133.2026.10.001

• 试验研究 •    下一篇

面向电解加工的3D直书写打印复合电极研究

薛云峰1,2, 李国栋1,2, 余祖元3, 陈彦秋1,2, 刘禹1,2   

  1. 1 江南大学机械工程学院,无锡 214122;
    2 江苏省食品先进制造装备技术重点实验室,无锡 214122;
    3 大连理工大学机械工程学院,大连 116024
  • 收稿日期:2025-12-25 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 李国栋,博士,副教授,主要研究方向为超精密特种加工。E-mail:liguodong@jiangnan.edu.cn
  • 作者简介:薛云峰,硕士研究生,主要研究方向为电解加工。

Research on the composite electrode fabricated by the direct ink writing of 3D printing for ECM

Xue Yunfeng1,2, Li Guodong1,2, Yu Zuyuan3, Chen Yanqiu1,2, Liu Yu1,2   

  1. 1 School of Mechanical Engineering,Jiangnan University,Wuxi 214122,China;
    2 Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology,Wuxi 214122,China;
    3 School of Mechanical Engineering,Dalian University of Technology,Dalian 116024,China
  • Received:2025-12-25 Online:2026-10-18 Published:2026-11-05

摘要: 杂散腐蚀是制约电解加工(Electrochemical Machining,ECM)中形状精度提升的关键障碍。常规工具电极以金属基体为主,可通过抑制电场或流场阻断电化学反应来实现对杂散腐蚀的抑制,然而,结构设计的复杂性与通用性等仍存在明显局限。增材制造技术的发展提供了新的制造方式,该技术具有极大的设计灵活性与材料选择性,可实现工具电极结构与材料的定制化设计,形成通用化快速制造范式,对推动电解加工技术在精密制造领域的应用具有重要工程意义。然而,增材制造技术在电解加工领域却缺乏深入研究与工程应用;因此,提出一种基于3D直书写打印(Direct Ink Writing,DIW)技术制备复合电极的方法。分别制备导电银浆与绝缘聚二甲基硅氧烷(Polydimethylsiloxane,PDMS)两种墨水,利用直书写打印技术实现金属层与绝缘基体的一体化打印成型,整体结构经过温度梯度化控制固化成型,结构牢靠且界面黏结强度大。系统化研究墨水各成分配比与流变性能及挤出成型精度的映射关系,确定合适的打印参数。通过对比分析复合电极与纯银、铜电极的导电性,验证了复合电极优良的导电性,最后,通过电化学加工复杂高深径比结构证明了其在阵列结构加工中的潜力,为电解加工工具电极的高效精密制备提供了新的技术思路。

关键词: 直书写打印, 电解加工, 工具电极, 杂散腐蚀

Abstract: Stray corrosion represents a critical obstacle to the shape accuracy in Electrochemical Machining (ECM). For the conventional tool electrodes,primarily based on metallic material,the suppress of stray corrosion depending on the constraint of electric or fluid field to prevent the electrochemical reaction. However,the complexity of structural design and bad adaptability limit its application. The advancement of Additive Manufacturing (AM) technology offers a novel fabrication approach with exceptional design flexibility and material selectivity. The capability of customized design of tool electrode structures and materials establishes a universal rapid manufacturing paradigm,significant for advancing the ECM application in precision manufacturing. Nevertheless,the application of AM in ECM is still not developed adequately and the related approach for stray corrosion is not reported. Therefore,this study proposes a novel method for fabricating the composite electrode based on Direct Ink Writing (DIW) of 3D printing. Conductive silver ink and insulating Polydimethylsiloxane (PDMS) ink are prepared separately then applied to print the conductive layer and insulating layer respectively,eventually realizing the integrated manufacturing of tool electrode. The gradient control of temperature is utilized to cure the whole structure,capable to achieve a robust structure and interface with high bonding strength. A systematic investigation is performed to reveal the relationship between ink component ratio with the rheological property and extrusion precision to determine optimal printing parameters. The comparative analysis of conductivity between the composite electrode and pure silver/copper electrodes validates its good conductivity. Finally,its potential for the complex array structure machining is proved through the machining of a complex structure with the high aspect ratio,offering a novel approach for the fabrication of ECM tool electrode in a manner of high-efficiency and good precision.

Key words: Direct Ink Writing(DIW), Electrochemical Machining(ECM), tool electrodes, stray corrosion

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn