Design and experiment of valveless piezoelectric pump with arrow-shaped bluff body

doi:10.16731/j.cnki.1671-3133.2024.04.002

Abstract

Abstract: Aiming at the low output flow of the valveless piezoelectric pump with triangular prism bluff body,a valveless piezoelectric pump with arrow-shaped bluff body was designed based on the low flow resistance characteristic of the arrow structure,and the structure and working principle of this pump were introduced.The velocity streamline diagram of the valveless piezoelectric pump with arrow-shaped bluff body was simulated by finite element software,and the resistance characteristic of this pump was compared with that of the valveless piezoelectric pump with triangular prism bluff body.The results show that the valveless piezoelectric pump with arrow-shaped bluff body can transport fluids in one direction,and its efficiency is 19.51 % higher than that of the valveless piezoelectric pump with triangular prism bluff body.A 3D printer was used to produce pump prototypes,and the flow rate and pressure difference tests were carried out.The tests results show that under the driving voltage of 300 V,the maximum flow rate and pressure difference of the valveless piezoelectric pump with arrow-shaped bluff body are 17.40 g/min and 470 Pa,which are 22.71 % and 37.03 % higher than those of the valveless piezoelectric pump with triangular prism bluff body,respectively.

Key words: arrow, valveless piezoelectric pump, triangular prism, flow rate, pressure difference

CLC Number:

TH38
TN384

YAN Tianxiang, WANG Junxian, QU Junchen, CHEN Hucheng, QIN Jianhua. Design and experiment of valveless piezoelectric pump with arrow-shaped bluff body[J]. Modern Manufacturing Engineering, 2024, 523(4): 7-12.

References

[1] HE X H,BIAN R Q,LIN N,et al.A novel valveless piezoelectric micropump with a bluff-body based on Coanda effect[J].Microsystem Technologies,2019,25(7):2637-2647.
[2] 郑晓培,王洪臣,吴波,等.直线型压电液压步进驱动器的研究[J].压电与声光,2018,40(1):60-63.
[3] YU M,CHEN S,KAN J W,et al.A miniature piezomembrane hydraulic pump with decreasing chambers in succession[J].Journal of Intelligent Material Systems and Structures,2021,32(4):442-448.
[4] ZHOU J,SUN W,FU J,et al.Working mechanisms and experimental research of piezoelectric pump with a cardiac valve-like structure[J].Micromachines,2022,13:1621.
[5] IZZO I,ACCOTO D,MENCIASSI A,et al.Modeling and experimental validation of a piezoelectric micropump with novel no-moving-part valves[J].Sensors and Actuators A:Physical,2007,133(1):128-140.
[6] 张立敏,王国旭.大振子压电泵模拟血液泵送研究[J].机床与液压,2017,45(19):23-25.
[7] LEE S M,KUAN Y D,SUNG M F.Design and fabrication of a magnetic fluid micropump for applications in direct methanol fuel cells[J].Journal of Power Sources,2011,196(18):7609-7615.
[8] LU S,YU M,QIAN C,et al.A quintuple-bimorph tenfold-chamber piezoelectric pump used in water-cooling system of electronic chip[J].IEEE Access,2020,8:186691-186698.
[9] SUN Y,WANG J.Digitally-controlled driving power supply for dual-active-valve piezoelectric pump[J].Microsystem Technologies,2019,25(4):1257-1265.
[10] 田晓超,杨志刚,吴越,等.无阀气体压电泵仿真分析与实验[J].振动.测试与诊断,2018,38(4):785-791,875.
[11] HU D B,HE L P,ZHANG Z,et al.Research on a valveless piezoelectric pump with inner concave triangle structure[J].Microsystem Technologies,2022(28):1935-1945.
[12] STEMME E,STEMME G.A valve-less diffuser/nozzle-based fluid pump[J].Sensors and Actuators A:Physical,1993,39(12):159-167.
[13] HUANG J,ZHANG J,WANG S,et al.Analysis of the flow rate characteristics of valveless piezoelectric pump with fractal-like Y-shape branching tubes[J].Chinese Journal of Mechanical Engineering,2014,27:628-634.
[14] LENG X,ZHANG J,JIANG Y,et al.Simulation analysis and experimental verification of spiral-tube-type valveless piezoelectric pump with gyroscopic effect[J].Chinese Journal of Mechanical Engineering,2014,27:822-829.
[15] 唐茗,包启波,张建辉,等.流线形流管无阀压电泵的仿真与实验[J].振动.测试与诊断,2021,41(1):56-61,200.
[16] 夏齐霄,张建辉,李洪.非对称坡面腔底无阀压电泵[J].光学精密工程,2006(4):641-647.
[17] 纪晶,张建辉,陈道根,等.无阀压电泵半球缺阻流体横向排列流阻干扰特性研究[J].农业机械学报,2014,45(9):340-346.
[18] 张蕊华,张建辉,朱银法,等.三棱柱阻流体无阀压电泵的设计与试验[J].光学精密工程,2016,24(2):327-334.
[19] 黄成志,裘进浩,季宏丽.压电叠堆泵及混合驱动器的设计[J].力学季刊,2013,34(1):1-7.
[20] 严天祥,李成其,王俊贤,等.半圆柱阻流体无阀压电泵的设计与试验[J].河南科技大学学报(自然科学版),2022,43(6):17-22.