Design of feeding and cutting control system for tubing coupling production line

doi:10.16731/j.cnki.1671-3133.2024.04.020

Modern Manufacturing Engineering ›› 2024, Vol. 523 ›› Issue (4): 146-152.doi: 10.16731/j.cnki.1671-3133.2024.04.020

Previous Articles Next Articles

Design of feeding and cutting control system for tubing coupling production line

LIN Sian¹, WANG Jirong^1,2, ZHAO Qinghai¹, WANG Xinlei¹, LI Jun³

1 College of Mechanical and Electrical Engineering,Qingdao University,Qingdao 266071,China;
2 Weihai Innovation Research Institute,Qingdao University,Weihai 264200,China;
3 College of Computer Science and Technology,Qingdao University,Qingdao 266071,China

Received:2023-08-02 Online:2024-04-18 Published:2024-05-31

Abstract

Abstract: In order to solve the problems of low accuracy of tubing coupling cutting and high scrap rate in the production of tubing couplings, each equipment works isolately under a low automation situation, the precise feeding unit, locking cutting unit and automatic unloading unit were optimized on the basis of the traditional steel pipe cutting equipment. The hardware and software design of the tubing coupling automatic production control system was carried out based on S7-1500 PLC, and the control logic was designed by TIA Portal, and the working status of the production line was monitored in real time by Siemens KTP1200 human-machine interaction panel to realize the coordinated control of the machine. The experiments show that the designed tubing coupling automatic production line has a high degree of automation and operates stably, which significantly improves the production efficiency and automation of tubing coupling.

Key words: precise feeding, lock cutting, automatic production line, human-machine interaction

CLC Number:

TP23
TP212

LIN Sian, WANG Jirong, ZHAO Qinghai, WANG Xinlei, LI Jun. Design of feeding and cutting control system for tubing coupling production line[J]. Modern Manufacturing Engineering, 2024, 523(4): 146-152.

References

[1] 徐刚,张海军,赵专东,等.钢管接箍智能加工线中全自动运输系统[J].钢管,2023,52(2):43-46.
[2] SYUFRIJAL S, RIF'AN M, PRABUMENANG A W R, et al. Design and implementation of pipe cutting machine with AC servo motor and PLC based on HMI[C]//IOP Conference Series: Materials Science and Engineering. Bristol:IOP Publishing, 2021,1098(4):042082.
[3] 梁媛,孙建业,魏成峰.基于SIEMENS 840D的无屑切管机控制系统的设计[J].新技术新工艺,2017(3):7-10.
[4] 祝正兵,朱呈霞,王扣成.一种直线进给锯切小型自动切管机的设计[J].机械工程师,2020(9):53-55.
[5] 白洋,王文广.PLC技术在电气工程及其自动化控制中的运用[J].中国设备工程,2023(3):199-201.
[6] 高国强,殷红,彭珍瑞.纸纱复合袋糊底机喷胶贴阀控制系统设计[J].现代制造工程,2022(3):154-159.
[7] 王乾廷,吴鹏,马莹,等.骨料散装机结构和控制系统设计[J].机床与液压,2023,51(6):82-87.
[8] 朱志远.PLC自动控制技术在变频器中的应用[J].中国设备工程,2022(24):212-214.
[9] 高东明,马建行,周磊,等.基于PLC的餐厨垃圾破碎机控制系统设计[J].制造业自动化,2022,44(2):133-137.
[10] 邹鑫,何文雪,牛杰.基于SIMATIC S7-1500PLC的电梯监控系统设计[J].机械制造与自动化,2022,51(2):210-213.
[11] 曹洋洋,何文雪,张凌志.基于PLC的瓦楞纸箱自动化生产线控制系统设计[J].机械制造与自动化,2020,49(1):192-194,197.
[12] 傅晓耕,冯潇潇.基于PLC的剪板机电气控制系统设计与研究[J].机械制造与自动化,2018,47(6):203-206.
[13] 张希,陈伟才,程金,等.基于西门子HMI配方在伺服系统中的应用[J].制造业自动化,2020,42(8):95-96.
[14] 王博. 基于PLC数据驱动的自动生产线控制时序仿真平台设计[D].武汉:华中科技大学,2019.
[15] 管同瀛. 基于现场总线的废旧金属破碎自动回收设备监控系统研究与设计[D].哈尔滨:哈尔滨工业大学,2020.

Design of feeding and cutting control system for tubing coupling production line

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics

Comments