Research on the asynchronous problem of virtual debugging of bearing ring size detection line

doi:10.16731/j.cnki.1671-3133.2025.01.002

Abstract

Abstract: In the process of virtual debugging,there is a problem that the data of virtual or real controller and virtual model are not synchronized,which leads to the confusion of virtual process flow,seriously affects the quality of virtual debugging system,and makes the digital twin system has the problem of asynchronization between virtual and reality. Taking the bearing ring size detection line as an example,a virtual debugging system based on Mechatronics Concept Designer (MCD) was designed,the asynchronous problem of the virtual debugging system was analyzed,and the internal and external delay test of MCD was designed. Based on the analysis and explanation of the existing solutions,a solution considering the internal and external delay of MCD was proposed. The experiment shows that this solution can realize the synchronization of virtual debugging system and digital twin system.

Key words: virtual debugging, virtual and real synchronization, digital twin, mechatronics, intelligent manufacturing

CLC Number:

TH166

LI Yunfeng, SHI Sushuang, YAO Shuang, SHI Zhanqun. Research on the asynchronous problem of virtual debugging of bearing ring size detection line[J]. Modern Manufacturing Engineering, 2025, 532(1): 15-22.

References

[1] 钟志华,臧冀原,延建林,等.智能制造推动我国制造业全面创新升级[J].中国工程科学,2020,22(6):136-142.
[2] 陶飞,戚庆林,张萌,等.数字孪生及车间实践[M].北京:清华大学出版社,2021.
[3] 朱国良.数字化双胞胎之虚拟调试技术应用[J].中国仪器仪表,2020(6):19-23.
[4] RUŽAROVSKÝ R,HOLUBEK R,SOBRINO D R D.Virtual Commissioning of a Robotic Cell Prior to Its Implementation into a Real Flexible Production System[J].Research Papers Faculty of Materials Science and Technology Slovak University of Technology,2018,26(42):93-101.
[5] MERIAM U,LEIRE E,GORKA U,et al.Implementation of Digital Twin-based Virtual Commissioning in Machine Tool Manufacturing[J].Procedia Computer Science,2022,200:527-536.
[6] HILL B R,CALLES L J,TSAGUE J,et al.Virtual Commissioning Implementation of Side Panel Assembly Process for Automotive Shop Floor[J].Sensors Transducers,2022,257(3):12-19.
[7] CHRIST L,MILLOCH E,BOSHOFF M,et al.Implementation of Digital Twin and Real Production System to Address Actual and Future Challenges in Assembly Technology[J].Automation,2023,4(4):345-358.
[8] GASIYAROV R V,BOVSHIK A P,LOGINOV M B,et al.Substantiating and Implementing Concept of Digital Twins for Virtual Commissioning of Industrial Mechatronic Complexes Exemplified by Rolling Mill Coilers[J].Machines,2023,11(2):276.
[9] SERGEY K,FADI A,BILAL A,et al.Virtual Engineering and Commissioning to Support the Lifecycle of a Manufacturing Assembly System[J].Machines,2022,10(10):939.
[10] WANG J J,NIU X T,GAO R X,et al.Digital twin-driven virtual commissioning of machine tool[J].Robotics and Computer-Integrated Manufacturing,2023,81:1-9.
[11] NOGA M,JUHÁS M,GULAN M.Hybrid virtual commissioning of a robotic manipulator with machine vision using a single controller[J].Sensors,2022,22(4):1621.
[12] 张琛,黑晨菲,李晶.自动上下料系统的数字孪生模型构建与虚拟仿真调试方法[J].制造业自动化,2024,46(1):45-50.[13] 邓飞,李文昊,蔡文龙,等.基于MCD的爆震轴类零件检测维修线虚拟调试仿真实验[J].实验技术与管理,2023,40(11):123-130,141.
[14] 蔡文站,田建艳,王书宇,等.基于NX MCD与TIA的机器人打磨联合虚拟调试研究[J].现代制造工程,2022(7):37-42,120.
[15] 郑星浩,李玮.基于MCD的玫瑰精油瓶装生产线的虚拟调试[J].林业机械与木工设备,2023,51(10):27-31.