Modern Manufacturing Engineering ›› 2024, Vol. 520 ›› Issue (1): 51-57.doi: 10.16731/j.cnki.1671-3133.2024.01.008

Previous Articles     Next Articles

Research on stability of four-wheel independent electric drive vehicle based on sliding mode coordinated control

ZHANG Xiaolin1, WANG Baohua1,2, DENG Zhaowen1, WU Huawei2,3, ZHU Yuanzhi4   

  1. 1 College of Automotive Engineering,Hubei University of Automotive Technology,Shiyan 442002,China;
    2 Hubei Longzhong Laboratory,Xiangyang 441000,China;
    3 Hubei University of Arts and Science,Xiangyang 441000,China;
    4 North China University of Technology,Beijing 100144,China
  • Received:2023-06-19 Online:2024-01-18 Published:2024-05-29

Abstract: In response to the dynamic characteristics and complex driving control strategies of four wheel independent electric drive vehicles,a driving collaborative control strategy based on torque distribution coefficient method was proposed,and a driving torque sliding mode coordination controller was designed. In conjunction with the vehicle instability judgment module,the additional yaw torque required for maintaining stability of the vehicle was calculated. At the same time,the load distribution method was used to design the optimal driving torque distribution controller,based on load distribution method, the driving torque was distributed to four wheels to maintain stable vehicle operation. To verify the effectiveness of the driving collaborative control strategy,a four wheel independent electric drive vehicle model was established based on CarSim software,and the proposed driving collaborative control strategy was compared with the ordinary sliding mode control strategy through simulation. The results showed that the driving collaborative control strategy reduces the yaw rate deviation by 25 % and the center of mass lateral deviation by 23 %,which can meet the requirements of vehicle stability control and reduce the difficulty of vehicle driving torque distribution control.

Key words: sliding mode coordinated control, stability control, four-wheel independent electric drive, torque distribution control

CLC Number: 

Copyright © Modern Manufacturing Engineering, All Rights Reserved.
Tel: 010-67126028 E-mail: 2645173083@qq.com
Powered by Beijing Magtech Co. Ltd