现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 31-39.doi: 10.16731/j.cnki.1671-3133.2026.09.004

• 机器人技术 • 上一篇    下一篇

基于四连杆机构的混联四足机器人设计与研究

王超1, 叶川2, 杨晗1   

  1. 1 西南石油大学教务部,南充 637001;
    2 西南石油大学理学院,南充 637001
  • 收稿日期:2025-11-06 出版日期:2026-09-18 发布日期:2026-10-22
  • 作者简介:王超,硕士,实验师,主要研究方向为机电一体化、智能控制。叶川,博士,讲师,主要研究方向为视觉感知及应用。杨晗,硕士,教授,主要研究方向为教育教学管理、复杂虚拟现实。E-mail:1289301222@qq.con
  • 基金资助:
    四川省自然科学基金项目(25ZNSFSC0369);南充市市校合作战略项目(23XNSYSX0025)

Design and research of hybrid quadruped robot based on four-bar linkage

WANG Chao1, YE Chuan2, YANG Han1   

  1. 1 Academic Affairs Department,Southwest Petroleum University,Nanchong 637001,China;
    2 College of Science,Southwest Petroleum University,Nanchong 637001,China
  • Received:2025-11-06 Online:2026-09-18 Published:2026-10-22

摘要: 为提升四足机器人腿部机构的控制准确性与运动实时性,设计并实现了一款基于四连杆机构的混联四足机器人。首先,通过仿生学原理分析犬类腿部运动特性,设计了三自由度同轴驱动混联腿部结构,均衡串联机构灵活性与并联机构稳定性,并利用SolidWorks软件完成了混联四足机器人的轻量化三维建模;然后,基于改进型D-H参数法推导出腿部的运动学模型,并进一步结合ADAMS-MATLAB软件联合仿真平台,搭建了步行步态规划与运动学验证一体化仿真流程,验证了步行步态规划的合理性和可行性,结果表明,步行步态下机身质心轨迹趋于稳定;最后,以ESP32控制器为核心搭建了嵌入式控制系统,完成了混联四足机器人的实物制作与运动控制调试,混联四足机器人实现了速度约为0.1 m/s的稳定行走,验证了仿真与实物测试结果的一致性,为轻量化混联四足机器人的工程应用提供了可靠依据。

关键词: 四连杆机构, 混联四足机器人, 步行步态规划, ADAMS-MATLAB软件

Abstract: In order to improve the control accuracy and real-time performance of quadruped robot leg mechanism,a hybrid quadruped robot based on four-bar linkage mechanism is designed and implemented. Firstly, through biomimetic principles analysis of the motion characteristics of dog legs,a three degree of freedom coaxial drive hybrid leg structure is proposed to balance the flexibility of the series mechanism and the stability of the parallel mechanism,and the lightweight three-dimensional modeling of the hybrid quadruped robot is completed by using SolidWorks software; then,based on the improved D-H parameter method,the kinematics model of the leg is derived,and then combined with the ADAMS-MATLAB software co simulation platform,the integrated simulation process of walking gait planning and kinematics verification is built,which verified the rationality and feasibility of walking gait planning, the results show that the trajectory of fuselage centroid tends to be stable under walking gait; finally,the embedded control system is built with ESP32 controller as the core,and the physical production and motion control debugging of the hybrid quadruped robot are completed. The hybrid quadruped robot can achieve a stable walking speed of about 0.1 m/s,which verified the consistency of the simulation and physical test results,and provided a reliable basis for the engineering application of lightweight hybrid quadruped robot.

Key words: four-bar linkage, hybrid quadruped robot, walking gait planning, ADAMS-MATLAB software

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn