现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 66-72.doi: 10.16731/j.cnki.1671-3133.2026.10.008

• 机器人技术 • 上一篇    下一篇

基于3D视觉传感的免示教机器人角焊缝识别与路径规划研究*

梅杰, 薛瑞雷, 夏磊, 张开   

  1. 新疆大学智能制造现代产业学院,乌鲁木齐 830017
  • 收稿日期:2025-08-30 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 薛瑞雷,本科,副教授,高级工程师,国务院特殊津贴专家,主要研究方向为机器视觉、图像处理、人工智能和智能化焊接机器人,已发表论文21篇。E-mail:2845603734@qq.com
  • 作者简介:梅杰,硕士研究生,主要研究方向为机器视觉、图像处理。E-mail:sam-hsueh@qq.com
  • 基金资助:
    *新疆大学优秀博士研究生创新项目(XJU2022BS092)

Research on fillet weld recognition and path planning of teach-free robot based on 3D visual sensing

Mei Jie, Xue Ruilei, Xia Lei, Zhang Kai   

  1. College of Intelligent Manufacturing Modern Industry,Xinjiang University,Urumqi 830017,China
  • Received:2025-08-30 Online:2026-10-18 Published:2026-11-05

摘要: 为了实现油罐浮船狭小空间免示教机器人焊接的路径规划,提出了一种基于3D视觉传感的角焊缝识别与路径规划算法。首先,通过3D相机获取工件点云数据;其次,依次通过直通滤波去除环境点云、体素降采样降低点云密度、移动最小二乘法滤波去除离群点以及投影变换和切片处理提取焊缝特征点;再次,结合埃尔米特插值多项式拟合焊接路径;最后,根据坐标系标定结果,将拟合焊接路径转化为机器人基坐标系下的焊接路径。试验结果表明,该算法可有效识别平角焊、立角焊及仰角焊焊缝,拟合焊接路径与理论焊接路径偏差在0.5 mm内,满足浮船箱体焊接精度要求。

关键词: 浮船焊接, 免示教机器人, 点云处理, 角焊缝识别, 路径规划

Abstract: In order to realize the path planning of teach-free robot welding in the small space of tank floating ships,a fillet weld recognition and path planning algorithm based on 3D vision sensing was proposed. Firstly,the workpiece point cloud data was obtained by the 3D camera. Secondly,through removing environmental point clouds using straight-through filtering,reducing point cloud density by voxel downsampling,and eliminating outliers using moving least squares filtering method,projection transformation and slicing processing were used to extract weld feature points. Thirdly,the welding path was fitted with Hermitt interpolation polynomial. Finally,according to the coordinate system calibration results,the fitting welding path was transformed into the welding path in the robot base coordinate system. Experiments results show that the algorithm can effectively identify flat fillet welding,vertical angle welding and elevation welding welds,and the deviation between the fitting welding path and the theoretical welding path is within 0.5 mm,which meets the welding accuracy requirements of the floating ship box.

Key words: floating ships welding, teach-free robots, point cloud processing, fillet weld recognition, path planning

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn