[1] 盛精,朱少辉,叶绍干,等. 直线共轭内啮合齿轮泵集中参数法建模与激振源研究[J]. 农业机械学报,2024,55(6):434-441.
[2] TANG Y,LU H,ZHU Z C,et al. Performance reliability evaluation of high-pressure internal gear pump[J]. Quality and Reliability Engineering International,2024,40(6):3465-3486.
[3] 陈鼎,张杨,叶绍干,等. 配合间隙对直线共轭内啮合齿轮泵流场特性的影响[J]. 农业机械学报,2024,55(2):442-449.
[4] SUN F,JI H,YANG S,et al. Numerical simulation and visualization study of cavitation characteristics in the high-speed linear-conjugate internal gear pump[J]. Flow Measurement and Instrumentation,2026,107:103068.
[5] 张煜,张艳涛,陈宗斌,等. 变位系数对渐开线内啮合齿轮泵困油容积和流量脉动特性的影响[J]. 机床与液压,2023,51(6):149-157.
[6] 张旭燕,曹文斌,杨国来,等. 变转速工况对直线共轭内啮合齿轮泵容积效率的影响[J]. 液压与气动,2023,47(2):54-61.
[7] 张东东. 齿轮副几何参数对直线共轭内啮合齿轮泵流量脉动特性的影响[J]. 机床与液压,2021,49(17):169-172.
[8] LIANG Y,CHEN Z,LIAO J. Numerical simulation and experimental evaluation of flow ripple characteristics of Truninger pump[J]. Scientific Reports,2022,12(1):1-29.
[9] CHAI H,YANG G,WU G,et al. Research on flow characteristics of straight line conjugate internal meshing gear pump[J]. Processes,2020,8(3):269.
[10] 史瑞杰,郑鹏,张宏毅. RV减速器摆线轮齿廓修形对温度的影响[J]. 机床与液压,2024,52(1):92-97.
[11] 莫帅,刘志鹏,罗炳睿,等. 考虑齿廓修形的行星齿轮传动系统动力学特性研究[J]. 振动工程学报,2024,37(2):191-199.
[12] 李大庆,毛亚洲,张宇轩,等. 齿面修形量对面齿轮副啮合性能的影响[J]. 现代制造工程,2025(1):80-86.
[13] 罗仲龙,张秀超. 齿廓修形对行星减速器啮合干涉现象影响的研究[J]. 现代制造工程,2024(6):88-94.
[14] GUO S,CHEN D. Calculation of unloading area of internal gear pump and optimization[J]. Mathematical Problems in Engineering,2020(1):1-9.
[15] 刘天旭,许孟辉,郭伟,等. 摆线型内啮合齿轮泵参数设计与间隙优化[J]. 机械设计与研究,2025,41(3):34-40.
[16] 王智勇,张力斌,张亚初,等. 基于齿面流体压力分布的齿轮泵性能改进方法[J]. 新技术新工艺,2024(12):41-49. |