现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 144-149.doi: 10.16731/j.cnki.1671-3133.2026.09.017

• 设备设计/诊断维修/再制造 • 上一篇    下一篇

叶片独立变桨垂直轴风力机设计与测试

刘根1, 刘牛1, 张睿1, 白友仪1, 张浩1,2, 刘占芳1   

  1. 1 重庆大学航空航天学院,重庆 400044;
    2 中国船舶重工集团海装风电股份有限公司,重庆 401122
  • 收稿日期:2025-11-17 出版日期:2026-09-18 发布日期:2026-10-22
  • 作者简介:刘根,硕士研究生,主要研究方向为变桨垂直轴风力机气动特性分析。刘占芳,博士,教授,主要研究方向为海上风力发电、离心-振动耦合结构动力学。E-mail:2654279604@qq.com;zhanfang@cqu.edu.cn
  • 基金资助:
    国家海上风力发电工程技术研究中心开放基金项目(HSFD22003)

Design and testing of a vertical-axis wind turbine with individual blade pitch control

LIU Gen1, LIU Niu1, ZHANG Rui1, BAI Youyi1, ZHANG Hao1,2, LIU Zhanfang1   

  1. 1 The College of Aerospace Engineering,Chongqing University,Chongqing 400044,China;
    2 CSIC(Chongqing) Haizhuang Wind Power Co.,Ltd.,Chongqing 401122,China
  • Received:2025-11-17 Online:2026-09-18 Published:2026-10-22

摘要: 变桨垂直轴风力机需根据不同运行工况采用不同变桨策略,以改善气动效率与载荷特性,而目前可执行多种变桨策略的试验风力机方案匮乏,制约了叶片变桨技术的工程化。为此,提出并测试了一种叶片独立变桨垂直轴风力机方案。结构上,以集成变桨驱动、支承与监测组件的叶片独立变桨机构为核心,形成了整机结构。控制上,协同叶片方位角识别、桨距角调控及多参数采集的硬件功能,基于可编程逻辑控制器(Programmable Logic Controller,PLC)搭建了叶片独立变桨控制系统。风洞试验表明,叶片独立变桨垂直轴风力机可灵活实现多种叶片变桨策略,通过叶片变桨显著提升了气动效率。该工作为变桨策略验证与后续机型优化提供了有效支撑与实践参考。

关键词: 垂直轴风力机, 叶片独立变桨, 变桨机构, 可编程逻辑控制器控制, 风洞试验

Abstract: Blade-pitching vertical-axis wind turbines require different pitching strategies under various operating conditions to improve aerodynamic efficiency and load characteristics. However,the current lack of experimental wind turbine setups capable of executing multiple pitching strategies has hindered the engineering application of blade-pitching technology. To address this,an independent blade-pitching vertical-axis wind turbine scheme is proposed and tested. Structurally,the design centers on an independent blade-pitching mechanism that integrates pitch actuation,support,and monitoring components,forming the complete turbine structure. For control,a hardware system synchronizing blade azimuth identification,pitch angle regulation,and multi-parameter acquisition is established,and an independent blade-pitching control system is built based on a Programmable Logic Controller (PLC). Wind tunnel tests demonstrate that this turbine can flexibly implement various blade-pitching strategies,significantly enhancing aerodynamic efficiency through blade pitching. This work provides effective support and practical reference for validating pitching strategies and optimizing subsequent turbine designs.

Key words: vertical-axis wind turbine, individual blade pitch control, pitch mechanism, Programmable Logic Controller (PLC) control, wind tunnel testing

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn