现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 116-121.doi: 10.16731/j.cnki.1671-3133.2026.10.014

• 制造技术/工艺装备 • 上一篇    下一篇

新能源汽车压铸铝合金托架的高效加工研究*

韦世勇1, 林焯伟2, 彭晓银1, 张涛3, 吴景良1, 万珍平2   

  1. 1 巨冈精工(广东)股份有限公司,东莞 523962;
    2 华南理工大学机械与汽车工程学院,广州 510640;
    3 北京工业大学机械与能源工程学院,北京 100124
  • 收稿日期:2025-10-09 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 万珍平,博士,教授,博士研究生导师,主要研究方向为新能源汽车电驱动系统设计与制造、精密/超精密加工、表面功能结构先进制造及其作用机理。E-mail:zhpwan@scut.edu.cn
  • 作者简介:韦世勇,本科,高级工程师,巨冈精工(广东)股份有限公司研发经理,高端数控机床创新联盟青年专家,获国务院政府特殊津贴、全国五一劳动奖章,主要研究方向为机械设计与制造、CAD/CAM数控技术。E-mail:shiyong.91@163.com
  • 基金资助:
    *东莞市工业母机与模具创新联合体项目(20251201500012)

Research on high-efficiency machining of die-cast aluminum alloy brackets for new energy vehicles

Wei Shiyong1, Lin Zhuowei2, Peng Xiaoyin1, Zhang Tao3, Wu Jingliang1, Wan Zhenping2   

  1. 1 Jugang Precision Industry (Guangdong) Co., Ltd., Dongguan 523962,China;
    2 School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;
    3 College of Mechanical and Energy Engineering,Beijing University of Technology,Beijing 100124,China
  • Received:2025-10-09 Online:2026-10-18 Published:2026-11-05

摘要: 针对新能源汽车压铸铝合金托架的大批量高效加工开展研究,分析了托架的复杂结构与严苛节拍要求下的加工难点,设计并优化了压铸铝合金托架的高效加工方案,结合计算机数字控制(Computer Numerical Control,CNC)模拟器对加工节拍进行了预测以及实际加工验证。结果表明,压铸铝合金托架的高效加工方案在精度与一致性上均达到预期,将单件加工节拍由20 min缩短至404 s,验证了压铸铝合金托架高效加工方案的有效性,实现了高效稳定生产,为汽车轻量化零/部件的规模化制造提供了可行路径与推广价值。

关键词: 压铸铝合金, 托架, 五轴加工中心, 加工优化, 新能源汽车

Abstract: This study focuses on the high-efficiency mass machining of die-cast aluminum alloy brackets for new energy vehicles. It analyzes the machining challenges posed by the bracket′s complex structure and stringent takt-time requirements,and develops as well as optimizes a high-efficiency machining scheme for die-cast aluminum alloy brackets. A Computer Numerical Control (CNC) simulator was employed to predict the machining cycle time,and the proposed scheme was further validated through actual production trials. The results demonstrated that the proposed high-efficiency machining process met the expected requirements for both machining accuracy and consistency, while reducing the cycle time per part from 20 min to 404 s. The effectivensess of the proposed process were thereby verified, enabling efficient and stable production and providing a feasible and valuable approach for the large-scale manufacturing of lightweight automotive components.

Key words: die-cast aluminum alloy, bracket, five-axis machining center, machining optimization, new energy vehicles

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn