现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 46-53.doi: 10.16731/j.cnki.1671-3133.2026.10.006

• 智能制造 • 上一篇    下一篇

基于机器人的后地板自动化加工单元设计与实践*

陈平1, 万珍平1, 韦世勇2   

  1. 1 华南理工大学机械与汽车工程学院,广州 510640;
    2 巨冈精工(广东)股份有限公司,东莞 523962
  • 收稿日期:2025-12-08 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 韦世勇,本科,高级工程师,主要研究方向为机械设计与制造、CAD/CAM数控技术。E-mail:shiyong.91@163.com
  • 作者简介:陈平,硕士研究生,主要研究方向为机械结合面接触、精密制造与装配工艺。E-mail:20242010594@mail.scut.edu.cn
  • 基金资助:
    *东莞市重大科技项目(20231200300212)

Design and implement of a robot-based automated rear floor machining unit

Chen Ping1, Wan Zhenping1, Wei Shiyong2   

  1. 1 School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;
    2 CATO Precision Machinery (Guangdong) Co., Ltd., Dongguan 523962,China
  • Received:2025-12-08 Online:2026-10-18 Published:2026-11-05

摘要: 针对新能源汽车一体式压铸后地板加工中刚性不足、易变形、定位困难及生产节拍受限等问题,设计并实践了一套集高刚性轻量化立式旋转夹具、地轨上下料机器人与五轴加工中心于一体的自动化加工单元。在高刚性轻量化立式旋转夹具设计阶段,通过有限元模态分析、静力学分析以及加强筋网络布局对夹具进行了优化,优化后的铝合金夹具质量相比初始方案减少了49 %,一阶固有频率提升至71.189 Hz;随后,规划设计一次装夹加工工艺,并集成地轨机器人系统,通过机器人与机床、夹具的协同控制,实现了后地板的自动化生产,生产节拍缩短了35 %,能够满足后地板实际加工需求。结果表明,该自动化加工单元运行稳定,核心夹具在显著减重的同时提升了刚度,为同类大型一体化结构件的自动化加工提供了宝贵经验。

关键词: 新能源汽车一体式压铸后地板, 机器人自动化, 加工单元, 立式旋转夹具, 有限元分析, 轻量化设计

Abstract: To address the challenges in machining integrated die-cast rear floors for new energy vehicles,including insufficient rigidity,susceptibility to deformation,difficult positioning,and limited production rhythm,an automated machining unit that integrates a high-rigidity,lightweight vertical rotary fixture, track-guided loading and unloading robots, and a five-axis machining center was designed and implemented. In the design phase of the high-rigidity,lightweight vertical rotary fixture,finite element modal and static analyses,as well as rib network layout optimization,were conducted. Through finite element optimization and rib network arrangement,the overall mass of the optimized aluminum alloy fixture was reduced by 49 % compared to the initial design,and the first natural frequency was increased to 71.189 Hz. Subsequently,a single-clamping machining process was designed and planned,and a track-guided robotic system was integrated to achieve coordinated control among the robot,machine tool,and fixture,enabling automated production of the rear floor. The production cycle was shortened by 35 %, and the machining performance met the practical requirement for rear floor production. The results indicated that the automated machining unit operates stably,with the core fixture achieving increased rigidity while significantly reducing weight,providing valuable insights for the automated machining of similar large integrated structural components.

Key words: new energy vehicle integrated die-cast rear floor, robotic automation, machining unit, vertical rotary fixture, finite element analysis, lightweight design

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn