现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 141-149.doi: 10.16731/j.cnki.1671-3133.2026.10.018

• 设备设计/诊断维修/再制造 • 上一篇    下一篇

基于抛物线修形ZK蜗杆齿面优化设计与性能分析*

吴佳浩1, 俞朝杰2, 王建文2, 郭晓欣2, 章跃军2, 苏建新1, 师陆冰3, 颜世铛3   

  1. 1 河南科技大学机电工程学院,洛阳 471003;
    2 浙江陀曼智能科技股份有限公司,绍兴 312000;
    3 郑机所(郑州)传动科技有限公司,郑州 450001
  • 收稿日期:2025-10-21 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 苏建新,教授,博士生导师,主要研究方向为齿轮的高性能传动设计和精密磨齿机开发。E-mail:jianxinsu@126.com
  • 作者简介:吴佳浩,硕士研究生,主要研究方向为蜗杆的设计与成形磨加工。E-mail:18236015661@163.com
  • 基金资助:
    *国家自然科学基金资助项目(52375052);河南省自然科学基金资助项目(242300421183);河南省重点研发项目(241111230300);中原领军人才项目(264200510032)

Optimization design and performance analysis of tooth surface based on parabolic modification of ZK worm gear

Wu Jiahao1, Yu Chaojie2, Wang Jianwen2, Guo Xiaoxin2, Zhang Yuejun2, Su Jianxin1, Shi Lubing3, Yan Shidang3   

  1. 1 School of Mechanical and Electrical Engineering,Henan University of Science and Technology,Luoyang 471003,China;
    2 Zhejiang Tuoman Intelligent Technology Co.,Ltd.,Shaoxing 312000,China;
    3 Zhengzhou Machinery Research Institute (Zhengzhou) Transmission Technology Co.,Ltd.,Zhengzhou 450001,China
  • Received:2025-10-21 Online:2026-10-18 Published:2026-11-05

摘要: 为提高ZK型蜗杆(ZK蜗杆,锥面包络蜗杆)传动的啮合性能与使用寿命,针对其易出现的应力集中、传动误差大及效率低下等问题,开展了对ZK蜗杆的精确建模与齿面修形的系统性研究。首先,依据砂轮与蜗杆的空间啮合原理,建立了ZK蜗杆齿面的数学模型,推导了端面齿形方程。在此基础上,提出了一种在砂轮法线方向进行抛物线修形的方法,通过控制最大修形量实现齿顶与齿根的平滑修缘,在分度圆处保持原齿形,以优化接触区分布并降低边缘应力。借助Matlab软件编写修形算法,利用Solidworks和Abaqus等工具,构建了多组不同最大修形量(0~10 μm)的蜗杆副模型,并进行有限元仿真对比分析。结果表明,修形后的蜗杆副接触应力显著降低,传动误差幅值减小,有效改善了传动平稳性与承载能力。该研究为ZK蜗杆的高性能设计与制造提供了理论依据与工程实践参考。

关键词: ZK蜗杆, 齿面修形, 抛物线修形, 接触分析, 有限元仿真, 传动误差

Abstract: To enhance the meshing performance and service life of the ZK type worm gear (ZK worm gear,zerol enveloping worm) transmission, a systematic study on the precise modeling and tooth surface modification of the ZK worm gear was conducted, targeting its inherent problems such as stress concentration, large transmission error and low efficiency. Firstly, based on the spatial meshing principle of the grinding wheel and the worm gear,a mathematical model of the tooth surface of the ZK worm gear was established, and the end face tooth profile equation was derived. On this basis, a method of parabolic modification in the normal direction of the grinding wheel was proposed. By controlling the maximum modification amount, the smooth modification of the tooth top and tooth root was achieved,and the original tooth profile was maintained at the pitch circle to optimize the distribution of the contact area and reduce the edge stress. The modification algorithm was written using Matlab software,and models of worm gear pairs with multiple different maximum modification amounts (0~10 μm) were constructed using Solidworks and Abaqus and subjected to finite element simulation and comparative analysis. The results show that the contact stress of the modified worm gear pair is significantly reduced,the amplitude of the transmission error is decreased, and the transmission stability and bearing capacity are effectively improved. This research provides theoretical basis and engineering practice references for the high-performance design and manufacturing of the ZK worm gear.

Key words: ZK worm gear, tooth surface modification, parabolic modification, contact analysis, finite element simulation, transmission error

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn