现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 76-83.doi: 10.16731/j.cnki.1671-3133.2026.09.009

• CAD/CAE/CAPP/CAM • 上一篇    下一篇

航空发动机复合材料风扇叶片力学性能与破坏机制研究

马秀菊1,2, 孙龙港2, 轩浩2, 陈恒2, 张在强2, 贾路兵2, 田杨2, 邢晓梦2   

  1. 1 西北工业大学航天学院,西安 710072;
    2 航天海鹰(镇江)特种材料有限公司,镇江 212132
  • 收稿日期:2026-01-12 出版日期:2026-09-18 发布日期:2026-10-22
  • 通讯作者: 陈恒,硕士,工程师,主要研究方向为复合材料结构设计、复合材料强度仿真与工艺仿真。E-mail:chenheng202210@163.com
  • 作者简介:马秀菊,硕士研究生,主要研究方向为复合材料热压罐制造工艺。
  • 基金资助:
    航天航空大型部件超声成像工业无损检测仪研发资本化项目(XMZBH022)

Mechanical properties and failure mechanisms of composite fan blades in aero-engines

MA Xiuju1,2, SUN Longgang2, XUAN Hao2, CHEN Heng2, ZHANG Zaiqiang2, JIA Lubing2, TIAN Yang2, XING Xiaomeng2   

  1. 1 School of Astronautics,Northwestern Polytechnical University,Xi’an 710072,China;
    2 Hiwing Materials Co.,Ltd.,Zhenjiang 212132,China
  • Received:2026-01-12 Online:2026-09-18 Published:2026-10-22

摘要: 针对复合材料风扇叶片在高离心载荷下破坏机制不明及传统强度预测方法精度不足的问题,通过多级离心力加载试验与精细化有限元建模分析相结合的方法,系统分析了叶片力学性能及失效机制。通过对复合材料叶片开展多级离心载荷拉伸静力试验与破坏试验,并基于Fibersim软件生成叶片的铺层结构文件,进而建立二维壳单元有限元分析模型,联合Tsai-Wu失效准则,实现对高应变集中区的精确捕捉。结果表明,叶片大曲率区因几何突变引发应变集中,结构失效形式主要为分层损伤、纤维断裂损伤,结构断口呈现45°的剪切断裂形式;仿真与试验的破坏载荷误差为13.76 %;模型在F1~F3工况下应变预测误差均小于20 %,载荷-位移曲线斜率误差为6.93 %。该结果验证了模型可靠性,支撑了国产复合材料叶片工程化应用。

关键词: 复合材料, 风扇叶片, 有限元仿真, 多级载荷试验, 航空发动机

Abstract: To address the unclear failure mechanisms and insufficient accuracy of traditional strength prediction methods for composite fan blades under high centrifugal loads,a systematic analysis of the mechanical properties and failure mechanisms of the blades was carried out by combining multi-stage centrifugal loading tests with refined finite element modeling. By conducting multi-level centrifugal tensile static and fracture tests on composite blades,and generating layup structure files for the blades using Fibersim software,a two-dimensional shell element finite element analysis model was established. Combined with the Tsai-Wu failure criterion,this approach enables the precise identification of regions with high strain concentration. The results showed that strain concentrations in the large-curvature regions of the blade were induced by geometric mutations. The primary failure modes were identified as delamination damage and fiber fracture damage,with the fracture surface exhibiting a 45° shear failure pattern. The error between the simulated and experimental failure loads was 13.76 %. Under operating conditions F1~F3,the strain prediction errors of the model were all below 20 %,and the slope error of the load-displacement curve was 6.93 %. These findings verified the reliability of the model and supported the engineering application of domestically produced composite blades.

Key words: composite materials, fan blades, finite element simulation, multi-stage loading test, aero-engine

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn