Design of phosphating liquid temperature system based on WinCC

doi:10.16731/j.cnki.1671-3133.2017.01.024

Abstract

Abstract: Phosphating is an important process in automobile coatings,phosphating solution temperature on the formation of a good car paint,play a crucial role.The system consisted of WinCC monitor,water-tank and PLC.The system has realized the measurement of PT100,temperature of solution temperature of solution of PID constant control,heating rod working duty cycle adjustment.This system not only greatly improves the automation level in the actual production line and realizes the remote control but also realizes the simulation teaching.This system has its own economy value,and it can save the teaching cost,it’s a typical combination of practical application and teaching case.

Key words: WinCC, phosphating liquid, temperature

CLC Number:

TP273

Wang Jing, Xi Zhongyu, Yan Shushan. Design of phosphating liquid temperature system based on WinCC[J]. Modern Manufacturing Engineering, 2017, 436(1): 121-125.

[1]	CHEN Long, LI Lun, XUE Yujun, LI Yuchuan, HUANG Wei. Research on elasto-hydrodynamic grease lubrication state for tapered roller bearings in wind turbine gearbox [J]. Modern Manufacturing Engineering, 2025, 535(4): 109-115.
[2]	SONG Zixiong, ZHOU Ming, WANG Zehan, YANG Jianwei, XU Pei, XIN Fangqing. High efficiency machining of GH4169D closed integral impeller by multi-electrode EDM [J]. Modern Manufacturing Engineering, 2024, 524(5): 95-103.
[3]	LIANG Jiankun, CHENG Xiang, WANG Wenbo, TANG Mingze, SUN Jinzhao, ZHENG Guangming, HE Jinpeng. Study on process parameters of micro helical milling small holes in superalloy [J]. Modern Manufacturing Engineering, 2024, 530(11): 131-136.
[4]	SHANG Huichao, HAN Xinlei, JI Changwei, PENG Xiangqian. Research and application of HTCC board dislocation detection algorithm based on improved LSD [J]. Modern Manufacturing Engineering, 2024, 520(1): 103-109.
[5]	Hong Conglu, Ke Xinmeng, Xu Tengyang, Xu Chuanbo, Guo Zhaotuan. Temperature feature of yaw damper and the effect on vehicle safety [J]. Modern Manufacturing Engineering, 2018, 456(9): 11-15.
[6]	Tang Linhu, Shen Hao, Chang Qingshan, Yin Jun, Lin Xiaojun. Experimental investigations in low, medium and high speeds dry hard turning of the high hardness, strength and wear resistance hardened steel [J]. Modern Manufacturing Engineering, 2018, 451(4): 1-5.
[7]	Tu Fuquan,Hu Shengmou,Zhuang Yuhang,Lü Jie,Wang Yunxue. Research on relationship model between temperature and magnetic induction intensity of magnetically controlled shape memory alloy [J]. Modern Manufacturing Engineering, 2018, 450(3): 19-22.
[8]	Yuan Fapeng,Huang Jin. Analysis and experiment on the driving characteristics of the temperature control switch of the shape memory alloy [J]. Modern Manufacturing Engineering, 2018, 450(3): 23-27.
[9]	Shen Zhenhui, Yang Shuanqiang. Research on optimization method of temperature measuring point arrangement based on fuzzy clustering and correlative degree analysis [J]. Modern Manufacturing Engineering, 2018, 458(11): 112-118.
[10]	Zhong Liqiong, Liang Yilong, Yang Ming, Jiang Yun . Influence of turning parameters on the surface characteristicsof GH4079 high temperature alloy [J]. Modern Manufacturing Engineering, 2017, 443(8): 78-82.
[11]	Wu Fujia, Xie Degang, Mi Le. Simulation and analysis of single pulse arc of EME technology [J]. Modern Manufacturing Engineering, 2017, 441(6): 94-98.
[12]	Ge Yingfei, Li Chunguang, Hou Junming, Xiong Wenliang, Liu Chang. Cutting temperature when heavy milling 6N01-T5 aluminum thin-walled honeycomb structural [J]. Modern Manufacturing Engineering, 2017, 439(4): 97-101.
[13]	Song Shuquan, Wang Zhenggang, Zhou Hai. Optimum design of the uniform flow orifice plate of the CuproBraze furnace [J]. Modern Manufacturing Engineering, 2017, 437(2): 93-95.
[14]	Zhao Yuncai, Xu Ying, Shangguan Xuchao. The effect of repairing speed on temperature field of pulsed coldwelding repair layer [J]. Modern Manufacturing Engineering, 2017, 446(11): 130-135.
[15]	He Zhifeng, Tang Dewen, Xie Yupeng, Li Pengxue, Zhou Xiongfeng. Study on temperature field distribution of tool-chips contact area for dry cutting 45 hardened steel [J]. Modern Manufacturing Engineering, 2017, 436(1): 94-99.

Design of phosphating liquid temperature system based on WinCC

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments