The modeling and movement simulation of unchoking 3D  printing nozzle’s device

doi:10.16731/j.cnki.1671-3133.2018.01.007

Abstract

Abstract: In order to observe the movement of unchoking 3D printing nozzle device,the three-dimensional entity model to various parts of device was established by using UG software,and virtual assembly the parts for device’s motion simulation.It is very intuitive to observe the specific process of unchoking 3D printing nozzle device,and the physical prototype was developed by this means,which provides basis and useful reference for optimize the unchoking 3D printing nozzle device.

Key words: nozzle device, 3D printing, virtual assembly, motion simulation

CLC Number:

TH16

Hou Jiawang,Xiang Kun,Ma Yuchao,Bian Di,Li Zhengqiang. The modeling and movement simulation of unchoking 3D printing nozzle’s device[J]. Modern Manufacturing Engineering, 2018, 448(1): 32-34.

[1]	LI Chao, ZHAO Bin, LIU Qingtao, ZHANG Yichao, LÜ Jingxiang. Method and process of micro surface circuit printing using a three degrees of freedom 3D printer [J]. Modern Manufacturing Engineering, 2024, 526(7): 42-48.
[2]	QIU Wen, ZHANG Fan, TAN Yuegang, ZHANG Jun, TU Yiwen. Path planning method for continuous carbon fiber composites 3D printing based on principal stress trajectory lines [J]. Modern Manufacturing Engineering, 2024, 525(6): 22-27.
[3]	ZHANG Fan, HAO Ran, TU Yiwen, YANG Xiao, LIU Jiachang. Variable layer height planning and path compensation method for unsupported rapid 3D printing with braces [J]. Modern Manufacturing Engineering, 2024, 525(6): 28-35.
[4]	DENG Yong, CHEN Chaoran, CAI Yijun, LU Suijia, CHEN Fake, LAN Yanhui. Design and experimental study of a 3D printing waste regeneration device [J]. Modern Manufacturing Engineering, 2024, 529(10): 16-23.
[5]	LIU Jiachang, ZHANG Fan, TU Yiwen, YANG Xiao, HAO Ran. A position adjustment algorithm for elbow models based on five-axis unsupported 3D printing [J]. Modern Manufacturing Engineering, 2024, 529(10): 31-40.
[6]	Qiu Haifei. Study of personnel cultivating system for 3D printing professional education [J]. Modern Manufacturing Engineering, 2018, 452(5): 62-67.
[7]	Gong Yunxi, Lan Shaodong. 3D printing and properties test analysis of a car air conditioning switch sample [J]. Modern Manufacturing Engineering, 2018, 451(4): 42-46.
[8]	Gou Wenhao, Yuan Lipeng, Gong Chikun, Gao Tong. Strategy of foot trajectory for bionics quadruped robots kinematic analysis and gait planning [J]. Modern Manufacturing Engineering, 2017, 442(7): 37-41.
[9]	Yang Biqi, Zhang Lixin, Lan Shaofei. Evaluation of spacecraft’s assembling process plan based on fuzzy comprehensive evaluation and virtual assembly [J]. Modern Manufacturing Engineering, 2017, 441(6): 109-113.
[10]	Hao Nanhai. Batch scheduling of 3D printing based on work-piece layout [J]. Modern Manufacturing Engineering, 2017, 440(5): 55-58.
[11]	Wang Rongliang, Shu Xiaoping. Thermal residual solutions to laminated object manufacturing with gradient cooling [J]. Modern Manufacturing Engineering, 2017, 446(11): 65-69.

The modeling and movement simulation of unchoking 3D printing nozzle’s device

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 11

Recommended Articles

Metrics

Comments