Research of power coupling mechanism for wave and wind  energy complementary generation platform

doi:10.16731/j.cnki.1671-3133.2018.01.028

Abstract

Abstract: To address the problems of low energy usage ratio and poor continuity for the traditional power generation platform,based on the introduction of wave and wind energy complementary generation system,a new type of power coupling mechanism using differential planetary gears as the core components was designed in order to implement the comprehensive utilization of wind-wave energy and solve the problem of the wind-wave energy coupling.The coupled movement characteristics was simulated by Matlab software,the actual performance of coupling mechanism was verified through the physical prototype test.

Key words: complementary power generation, differential planetary gears, energy coupling, simulation, physical prototype test

CLC Number:

TH132
TK83

Chen Guangqing,Ji Deheng,Wang Jidai,Zhang Liang. Research of power coupling mechanism for wave and wind energy complementary generation platform[J]. Modern Manufacturing Engineering, 2018, 448(1): 146-150.

References

[1] 石茂顺,李伟,林勇刚.基于液压传动的风浪互补发电系统的建模与仿真[J].太阳能学报,2013(7):1257-1263.
[2] KARIMIRAD M.Offshore Energy Structures[M].Berlin:Springer International Publishing,2014.
[3] 刘圣冠.海上风浪互补发电系统的基础平台设计和研究[D].北京:华北电力大学,2014.
[4] 巫明茂.海上发电平台的设计与研究——海风、海浪、海流能量同时收集并同步耦合发电技术.中国海洋可再生能源发展年会暨论坛[C].广州:海洋出版社,2013.
[5] 王德茂.波浪能风能的联合发电装置[J].电力与能源,2001,22(4):165-166.
[6] WU Z Y,GAO T,ZHANG S.Design and Research on Device of Generating Power by Wind and Wave at Sea[J].Advanced Materials Research,2013(718/720):1667-1672.
[7] 汤双清,徐艳飞,朱光宇.直叶片垂直轴风机气动设计参数分析[J].机械设计与制造,2012(9):66-68.
[8] 羊晓晟,曹守启,侯淑荣,等.一种新型振荡浮子式海洋波浪能发电装置的设计[J].上海海洋大学学报,2010(5):698-702.
[9] 谢进利,张维强.差动行星轮系作为并联HEV转矩合成器的动力匹配研究及参数优化[J].机械科学与技术,2010(11):1553-1556.
[10] 刘钊,赵世琴,黄宗益.用杠杆模拟法建立行星变速器动力学模型[J].汽车工程,2000(4):274-277.
[11] 石万凯,秦鹏飞,杨亚联.新型动力耦合系统工作模式分析与参数匹配研究[J].机械设计,2016(10):5-10.
[12] 杨煜,何炎平,李勇刚.基于Simulink/Matlab的变速风力发电机组在低于额定风速时的仿真研究[J].华东电力,2009(5):816-819.
[13] 李丹娜.风轮机输出特性模拟系统的实现[J].机械设计与制造,2009(6):228-230.
[28] 国务院.国务院关于积极推进“互联网+”行动的指导意见[R].北京:中华人民共和国国务院公报,2015.
[29] 国务院.国务院关于深化制造业与互联网融合发展的指导意见[R].北京:中华人民共和国国务院公报,2015.
[30] LI Bohu,CHAI Xudong,ZHANG Lin,et al.Smart cloud manufacturing (cloud manufacturing 2.0)——a kind of paradigm and approach of smart manufacturing in internet era.Proc.of the 2015 International Intelligent Manufacturing Conference[C].Beijing:[s.n.],2015.
[31] 李伯虎,柴旭东.复杂产品虚拟样机工程[J]计算机集成制造系统,2002,8(9):678-683.

[1]	YING Jiangpeng, SUN Youping, WU Guangqing, CHEN Pengyu, JI Hongchun. Research on closed-loop control strategy of electromechanical brake clamping force [J]. Modern Manufacturing Engineering, 2025, 538(7): 48-56.
[2]	WANG Lei, ZHANG Lei, ZHANG Yue, LI Hongbing, SUN Ming, LU Guan. Design and research of four-fingered dexterous hand [J]. Modern Manufacturing Engineering, 2025, 535(4): 69-76.
[3]	LIANG Tong, BAI Yuhang, ZHANG Baoxu, LI Yanan, ZHAO Yanjun. Structural design and research of rehabilitation exoskeleton based on TRIZ for two-phase travel [J]. Modern Manufacturing Engineering, 2025, 535(4): 84-90.
[4]	LIU Liang, HE Yuming, QI Siyuan. Optimization study of flexible job-shop scheduling based on digital twin simulation [J]. Modern Manufacturing Engineering, 2025, 534(3): 41-51.
[5]	ZHOU Xianjun, LI Hai, PENG Yuxuan, YU Fuhao, FANG Hao. Study on the characteristics of special-shaped leaf spring of injection-production integrated automatic steering tool [J]. Modern Manufacturing Engineering, 2025, 532(1): 71-79.
[6]	ZHU Feng, YAO Jiannan. Design of magnetorheological damper vibration-damping suspension device for longitudinal vibration of mine hoisting system [J]. Modern Manufacturing Engineering, 2025, 532(1): 128-136.
[7]	CHENG Lanlan, XIONG Liangshan. The influence of J-C constitutive model parameters on the simulation results of 45 steel drilling [J]. Modern Manufacturing Engineering, 2024, 528(9): 20-24.
[8]	ZHANG Keming, CAO Yu, XI Shangbin, ZHENG Pei, ZHANG Zhenya, HUANG Jia, LIU Wencheng, YAO Jun. Fundamental mechanism of calibration coefficients considering the effect of the bonding process on the moiré interference drilling method [J]. Modern Manufacturing Engineering, 2024, 526(7): 1-8.
[9]	MA Liping, LI Shaopeng, ZHAO Yanping, CHENG Zixin, LIN Hongli. Research on modeling and simulation of electronic brake booster for new energy vehicles [J]. Modern Manufacturing Engineering, 2024, 525(6): 82-87.
[10]	LUO Zhonglong, ZHANG Xiuchao. Study on the influence of tooth profile modification on meshing interference phenomenon of planetary reducer [J]. Modern Manufacturing Engineering, 2024, 525(6): 88-94.
[11]	LIU Senlin, XING Fei, BIAN Hongyou, WANG Hai. Design simulation and experimental research on the structure of the waveform air inlet duct in selective laser melting [J]. Modern Manufacturing Engineering, 2024, 524(5): 138-144.
[12]	GAO Shanfeng, LEI Le, ZHAO Lun, YE Kai, LI Chengwang, ZHAO Shengsheng, SONG Zhendong, BAO Danyang. Study on forming mechanism and mechanical behavior of self-piercing riveting of aerospace aluminum and titanium alloys [J]. Modern Manufacturing Engineering, 2024, 523(4): 1-6.
[13]	LI Huan, YU Fei, LIU Ning, YU Zhenlong, ZHANG Mingyuan, LIU Yu, YANG Lei. Research on key technology of forward development of torsion beam based on numerical simulation [J]. Modern Manufacturing Engineering, 2024, 523(4): 94-101.
[14]	ZHANG Funeng, LIN Zhiwei, XUE Yong, LI Jiongqi, FU Jianzhong. Optimization of the milling cutter spiral groove grinding process based on grinding force [J]. Modern Manufacturing Engineering, 2024, 521(2): 61-67.
[15]	ZHANG Xing, DENG Jianxin. Research on cloud service system for cargo transportation damage analysis based on ANSYS [J]. Modern Manufacturing Engineering, 2024, 521(2): 102-111.

Research of power coupling mechanism for wave and wind energy complementary generation platform

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments