A study on the CUSUM control chart in steering lamp of motorcycle parts

doi:10.16731/j.cnki.1671-3133.2017.01.022

Abstract

Abstract: The Shewhart control chart,which is based on the 3σ principle is often used in the detection of motorcycle flasher flicker frequency,but the classic Shewhart control chart is not sensitive to small drift in the frequency.Small drift when it happens,will leads to the result that the adjustment of the frequency of flasher flicker is not in time.Control the changes of the frequency of the flasher flicker by using CUSUM control chart as a result,it can timely detect the flasher flicker frequency of small drift,improve the efficiency of control chart,ensure product quality and reduce the product cost.

Key words: Shewhart control chart, CUSUM control chart, flasher, power

CLC Number:

O213.1

Cheng Qin, Zhang Jian, Liu Liu. A study on the CUSUM control chart in steering lamp of motorcycle parts[J]. Modern Manufacturing Engineering, 2017, 436(1): 114-116.

[1]	LIU Yuxing, ZHANG Hong, WANG Mengkun. Speed loop control of permanent magnet direct-drive wind power system based on fuzzy linear self-immunity [J]. Modern Manufacturing Engineering, 2025, 533(2): 144-150.
[2]	YANG Fenghai, YANG Xiaoying, PEI Zhijie, WU Yaqi, ZHANG Zhiwei. Deep reinforcement learning for production intelligent scheduling of wind turbine extrusion panels [J]. Modern Manufacturing Engineering, 2025, 532(1): 23-32.
[3]	WANG Huan, CUI Luxing, GE Shuaishuai, ZHANG Zhigang. Transmission system design of dual-mode power split type hybrid electric vehicle [J]. Modern Manufacturing Engineering, 2024, 526(7): 85-94.
[4]	LI Chao, YU Kangfan, ZHANG Jianrun, LIU Xiaobo. Dynamic modeling and parameter influence of powerpack rigid-flexible coupling two-stage vibration isolation system for internal combustion multiple unit [J]. Modern Manufacturing Engineering, 2024, 524(5): 71-79.
[5]	WANG Huan, CUI Luxing, GE Shuaishuai, ZHANG Zhigang. Research on parameter matching and optimization of power split hybrid electric vehicle [J]. Modern Manufacturing Engineering, 2024, 521(2): 53-60.
[6]	XU Enhao, ZHOU Jingling, ZHOU Xingming. Study on the rule of pitch change and aerodynamic performance optimization of vertical axis wind turbine [J]. Modern Manufacturing Engineering, 2024, 530(11): 153-159.
[7]	ZHANG Weigang, ZHOU Hongsheng. Research on obstacle avoidance technology of electric inspection robot based on improved marine predator algorithm [J]. Modern Manufacturing Engineering, 2024, 529(10): 60-66.
[8]	Wu Jianwei,Liu Fuyun,Bao Jiading,He Shuilong,Yang Mengjie. Composition theorem of the moment of inertia derived by using matrix and its application in automobile powertrain system [J]. Modern Manufacturing Engineering, 2018, 455(8): 53-57.
[9]	Lu Jun, Jiang Mingliang, Sun Baoqun, He Long. Design and analysis of hydraulic system of the hydro-mechanical continuously variable transmission [J]. Modern Manufacturing Engineering, 2018, 453(6): 147-152.
[10]	Li Bochao, Xie Jinfa, Zhang Zhengqi, Xiao Lingling. Selection and experimental analysis of power system for extended-range electric vehicle [J]. Modern Manufacturing Engineering, 2018, 452(5): 5-11.
[11]	Deng Tao, Luo Weixing. Research on estimation methods of battery SOH for electric vehicle [J]. Modern Manufacturing Engineering, 2018, 452(5): 43-49.
[12]	Xie Ou, Li Hua, Zhou Lian. Design and research of contactless power transmission system in rotary ultrasonic vibration machining [J]. Modern Manufacturing Engineering, 2018, 451(4): 125-129.
[13]	Song Xiaolin,Ren Xiangxi. Hierarchical energy management strategy for hybrid electric vehicle based on dynamic FSM-Fuzzy control strategy [J]. Modern Manufacturing Engineering, 2018, 450(3): 68-73.
[14]	Zhang Changfu,Sun Lili,Zheng Pixian,Liang Ruoyun,Yun Kang. Micro electrochemical machining for difficult-to-cut high elastic alloy [J]. Modern Manufacturing Engineering, 2018, 450(3): 99-103.
[15]	Chang Zhen,Hu Junke,Tao Shengren,Wang Lijuan. Research on technologies of a new hydraulic drive hybrid power system’s energy saving [J]. Modern Manufacturing Engineering, 2018, 449(2): 40-45.

A study on the CUSUM control chart in steering lamp of motorcycle parts

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments