Application of RFID technology to the workpiece localization

doi:10.16731/j.cnki.1671-3133.2017.07.022

Abstract

Abstract: The application of the Radio Frequency Identification (RFID) in the work piece on the production line is proposed considering the costs,recognition speed and et al.Firstly,the location system of the production line workpiece is designed based on the fundamental technology of the RFID.Then the system hardware selection and based on MATLAB neural network system are realized and the feasibility is verified in the laboratory experiments.The experimental results show that location function can be achieved based on the received signal strength of the antenna and the locating accuracy of the system can be controlled within 4cm for one 60cm × 50cm area while the maximum Euclid error is less than 3.9cm.

Key words: localization, radio frequency identification, neural network, localization accuracy

CLC Number:

TK11

Ma Zongzheng, Ma Haishu, Ma Tao, Yang Anjie, Wang Xinli. Application of RFID technology to the workpiece localization[J]. Modern Manufacturing Engineering, 2017, 442(7): 109-113.

References

[1] 张曙.工业4.0 和智能制造[J].机械设计与制造工程,2014,43(8):1-5.
[2] L H,D H,B P,et al.Survey of Wireless Indoor Positioning Techniques and Systems[J].IEEE Transactions on Systems,Man,and Cybernetics,Part C:Applications and Reviews,2007,37(6):1067-1080.
[3] K K.Efficient design of indoor positioning systems based on location fingerprinting.2005 International Conference on Wireless Networks,Communications and Mobile Computing[C].[S.l.]:IEEE,2005:181-186.
[4] 曹世华.室内定位技术和系统的研究进展[J].计算机系统应用,2013(9):1-5.
[5] O M.Improved supply chain performance through RFID technology:comparative case analysis of Metro Group and Wal-Mart[D].Waollongong:University of Waollongong,2012.
[6] Z L,G R,P B S.Applications of RFID technology and smart parts in manufacturing.ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference[C].USA:American Society of Mechanical Engineers,2004:123-129.
[7] R S.Radio frequency identification device (RFID) and real time location systems (RTLS) enhance nursing care delivery.Sigma Theta Tau International’s 25th International Nursing Research Congress[C].[S.l.]:STTI,2014.
[8] P S,P M,K D,et al.Automated Toll Collection System Using RFID[J].IOSR Journal of Computer Engineering,2013,9(2):61-66.
[9] H T,H C D,B B M,et al.Range-free localization schemes for large scale sensor networks.Proceedings of the 9th annual international conference on Mobile computing and networking[C].[S.l.]:ACM,2003:81-95.[10] LM N,L Y H.LANDMARC:indoor location sensing using active RFID[J].Wireless Networks,2004,10(6):701-710.
[11] 马歇尔.Visual Studio 2010并行编程从入门到精通[M].北京:清华大学出版社,2013.
[12] G M,C N,B R W.An artificial neural network approach to the problem of wireless sensors network localization[J].Robotics and Computer-Integrated Manufacturing,2013,29(1):96-109.
[13] H R.Theory of the backpropagation neural network.International Joint Conference on Neural Networks[C].[S.l.]:IEEE,1989:593-605.
[14] 康东,石喜勤,李勇鹏.射频识别(RFID) 核心技术与典型应用开发案例[M].北京:人民邮电出版社,2008.

[1]	MA Li, ZHANG Di. Fault-tolerant control of redundant robotic manipulators based on QP-ZNN [J]. Modern Manufacturing Engineering, 2025, 537(6): 73-83.
[2]	JIN Yiyang, LI Lei, XU Jiawei, WANG Jianhua, WANG Guowei, XU Runkang. Pose error compensation of 4-PPPS parallel mechanism based on RBF neural network [J]. Modern Manufacturing Engineering, 2025, 535(4): 140-150.
[3]	XU Shuai, LI Yanwu, XIE Hui, NIU Xiaowei. The PPO algorithm based on convolutional pyramid network to solve job-shop scheduling problem [J]. Modern Manufacturing Engineering, 2025, 534(3): 19-30.
[4]	PENG Maohui, ZOU Shuai, TENG Jiahuang, HUANG Fuchuan. Application of improved northern goshawk optimization algorithm in structural optimization of the lower rocker arm ina vertical roller mill [J]. Modern Manufacturing Engineering, 2025, 533(2): 121-129.
[5]	LI Lianghui, LI Le, WANG Qian, ZHANG Ximing. A loss prediction model for PMSM based on BP neural network optimizedby dung beetle optimizer [J]. Modern Manufacturing Engineering, 2025, 533(2): 130-137.
[6]	FANG Kaiyue, WANG Chao, WU Zhankui, ZHU Yannan, GENG Li, WANG Xin. Robot-dependent automatic gripping and positioning technology for multiple part structures [J]. Modern Manufacturing Engineering, 2024, 528(9): 60-64.
[7]	HU Ying, YUAN Jiachen, LÜ Chang. Research and application of an intelligent optimization process prediction model for roller straightening process [J]. Modern Manufacturing Engineering, 2024, 527(8): 109-117.
[8]	LI Zeji, ZHOU Xueliang, SUN Peilu. Tool wear monitoring methods incorporating residual block and Swin-Transformer mechanisms [J]. Modern Manufacturing Engineering, 2024, 527(8): 126-135.
[9]	ZHANG Miaomiao, HOU Rongguo, LÜ Zhe, WANG Longqing, SHI Guangxing, WANG Zhongqing. Experimental study on the surface properties of AWJ surface strengthening 3D printed AlSi10Mg based on GA-GRNN [J]. Modern Manufacturing Engineering, 2024, 526(7): 35-41.
[10]	YANG Huailei, YAO Yunlei. Optimal fault-tolerant control of robot multi-joint manipulator based on fault observer [J]. Modern Manufacturing Engineering, 2024, 526(7): 61-68.
[11]	DENG Xu, ZHANG Aimei. Research and application of force and stability monitoring system of hydraulic gantry crane [J]. Modern Manufacturing Engineering, 2024, 526(7): 135-143.
[12]	JIA Yingxia, WANG Donghui. Collaborative robust control for dual-arm of industry robot based on adaptive neural network [J]. Modern Manufacturing Engineering, 2024, 525(6): 61-68.
[13]	CHENG Yuanbin, YUAN Wenping, ZHANG Tao, LIU Zhifeng. Research on fatigue life prediction of flexspline of harmonic reducer based on BP neural network [J]. Modern Manufacturing Engineering, 2024, 523(4): 140-145.
[14]	ZHANG Ruoyu, HU Youmin, WU Bo, YANG Hua, QIN Junfeng. Workshop disturbance detection method based on BA-PNN algorithm and digital twin technology [J]. Modern Manufacturing Engineering, 2024, 522(3): 15-22.
[15]	SUN Jianmin, YANG Shihu, ZHAO Lei, YAO Dechen. Improved PSO-BP optimization control of electronic throttle based on dynamic inertia weight [J]. Modern Manufacturing Engineering, 2024, 521(2): 45-52.