Secondary development of ABAQUS in the simulation of cutting of titanium alloy

doi:10.16731/j.cnki.1671-3133.2017.07.021

Modern Manufacturing Engineering ›› 2017, Vol. 442 ›› Issue (7): 105-108.doi: 10.16731/j.cnki.1671-3133.2017.07.021

Previous Articles Next Articles

Secondary development of ABAQUS in the simulation of cutting of titanium alloy

Chen Bowei^1,2, Hu Yahui^1,2, Yang Cuilei^1,2, Zhang Yang^1,2

1 Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin 300384,China;
2 Tianjin University of Technology,Tianjin 300384,China

Received:2015-12-13 Online:2017-07-18 Published:2017-09-29

Abstract

Abstract: Based on the finite element software of ABAQUS,the Python language was used for pre-processing module of ABAQUS for secondary development.By discussing the ways of ABAQUS secondary development,developed a Python script on cutting simulation of titanium alloy.The procedure was characteristic of friendly interface and strong operation so that users can create a simulation model according to actual parameters of cutting titanium alloy.This method not only improved the efficiency of the analysis,but also provided users with a convenient platform for analysis and design.The procedure was used to analyze the influence of cutting depth on the main cutting force in cutting of titanium alloy.Verified the feasibility of the function and gave a way for further research on different cutting rates on the main cutting force in cutting of titanium alloy.

Key words: ABAQUS software, secondary development, cutting of titanium alloy

CLC Number:

TH164

Chen Bowei, Hu Yahui, Yang Cuilei, Zhang Yang. Secondary development of ABAQUS in the simulation of cutting of titanium alloy[J]. Modern Manufacturing Engineering, 2017, 442(7): 105-108.

[1]	Lu Liming, Yu Yunyun, Zeng Guowen, Lu Jinfu. Static analysis of rolling-sliding bearing based on ABAQUS [J]. Modern Manufacturing Engineering, 2018, 455(8): 92-97.
[2]	You Ying, Chen Di, Wang Jun, Wang Quan, Wei Qiong, You Yufeng. The optimization design of structure for compacting garbage station based on lightweight [J]. Modern Manufacturing Engineering, 2018, 453(6): 44-48.
[3]	Chen Chuncheng , Hu Yahui , Zheng Qingchun, Zhang Shanqing. Secondary development of ABAQUS in the simulation of bone drilling based on Python [J]. Modern Manufacturing Engineering, 2018, 453(6): 54-57.
[4]	Yu Tianbiao,Sun Xue,Ha Da. Structure modeling of artificial bone tissue based on reverse engineering and UG secondary development [J]. Modern Manufacturing Engineering, 2018, 450(3): 154-159.
[5]	Li Xuemei,Hou Boqi,Liu Fuyun. The study of 3D dimensioning adjustment method based on variant design [J]. Modern Manufacturing Engineering, 2018, 449(2): 11-17.
[6]	Yu Jin, Wang Yinqi, Shao Huichao. Simulation study on milling error for casing based on R cutter accurate milling force modeling [J]. Modern Manufacturing Engineering, 2018, 458(11): 38-43.
[7]	Feng Liyan, Zhou Xinlei, Liu Yingjuan. 3D parameterized modeling and modal analysis of globoidal indexing cam mechanism [J]. Modern Manufacturing Engineering, 2017, 443(8): 53-56.
[8]	Wang Min, Zhang Mandong. Study on the dynamic display of 3D annotation information based on the secondary development of UG [J]. Modern Manufacturing Engineering, 2017, 447(12): 92-95.

Secondary development of ABAQUS in the simulation of cutting of titanium alloy

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments