[1] 张杰,邓砚泽,张瀚,等. 一种玄武岩纤维缠绕复合管成型装置:CN201911067029[P]. 2026-08-10. [2] Kukwi T,Shan C,Li Pengfei,et al. Continuous Improvement in Composite Manufacturing:A Review of Automated Fiber Placement Process Evolution and Future Research Prospects[J]. Applied Composite Materials,2025,32(4):1-48. [3] 苏鹏,崔文峰. 先进复合材料热压罐成型技术[J]. 现代制造技术与装备,2016(11):165-166. [4] Lukaszewicz H J A,Ward C,Potter K D.The engineering aspects of automated prepreg layup:History,present and future[J].Composites Part B Engineering,2012,43(3):997-1009. [5] 单忠德,范聪泽,宋文哲. 面向2035的复合材料构件精确制造发展战略研究[M]. 北京:机械工业出版社,2023. [6] 林静明,许可. 基于PINN的复合材料自动铺放轨迹整体规划[J]. 南京航空航天大学学报,2023,55(5):914-923. [7] Miller V A. High-speed tracer-based PLIF imaging for Scra-mjet ground testing[M]. Palo Alto, California,USA:Stanford University,2014. [8] Cabrera N O,Alcock B,Klompen E T J,et al. Filament winding of co-extruded polypropylene tapes for fully recycla-ble all-polypropylene composite products[J]. Applied composite materials,2008,15(1):27-45. [9] 蒋威,周悦,杨飞,等. 红外辅助自动纤维铺放工艺对连续玻璃纤维增强聚丙烯复合材料结构与性能影响[J]. 复合材料学报,2023,40(4):2015-2025. [10] 文立伟,余永波,齐俊伟,等. 基于自动铺放成型的红外加热系统研究[J]. 航空学报,2011,32(10):1937-1944. [11] 任毅,虞筱琛,祝颖丹,等. 碳纤维增强热塑性复合材料激光原位成型工艺调控研究进展[J]. 塑料工业,2025,53(2):6-12,51. [12] 郭鹏,杨辰光,李祥利,等. 机器人化复合材料自动铺层技术综述[J]. 自动化学报,2024,50(5):873-897. [13] 王华侨,郝齐国,王宣鉴,等. 复合材料自动铺丝装备及软件技术的发展现状及挑战[J]. 制造技术与机床,2025(8):60-68. [14] 邢悦,何鹏飞,李竞龙,等. 连续纤维增强聚合物复合材料增材制造工艺研究进展[J]. 复合材料学报,2023,40(7):3703-3721. [15] Prashanth S,Subbaya K M,Nithin K,et al. Fiber reinforced composites-a review[J]. Journal of Material Science & Engineering, 2017,6(3):2-6. [16] 翟福强.高性能纤维基本原理及制品成形技术[M]. 北京:化学工业出版社,2022. [17] Römer M,Bergers J,Gabriel F,et al. Temperature Control for Automated Tape Laying with Infrared Heaters Based on Reinforcement Learning[J]. Machines,2022,10(3):164. [18] 黄亿洲,王志瑾,刘格菲. 碳纤维增强复合材料在航空航天领域的应用[J]. 西安航空学院学报,2021,39(5):44-51. [19] 沃留杰,郑修军,陈雪峰,等. 基坑加固用碳纤维复合材料制备与性能研究[J]. 合成材料老化与应用,2025,54(4):32-35. [20] 杨超军. 短切碳纤维热塑性复合材料制备及性能研究[D]. 大连:大连理工大学,2023. [21] 杜善义,关志东. 我国大型客机先进复合材料技术应对策略思考[J]. 复合材料学报,2008(1):1-10. [22] 江洪,彭导琦. 先进复合材料在航天航空器中的应用[J]. 新材料产业,2022(1):2-7. [23] 司诚,张亮,余晶晶,等. 碳纤维环氧树脂复合预浸料层合板的应用研究[J]. 粘接,2023,50(3):86-89. [24] 张成林. 碳纤维/环氧树脂复合材料预浸料固化动力学及其层合板性能的研究[D]. 淄博:山东理工大学,2021. [25] 王芃霖. 碳纤维聚丙烯预浸料及其复合材料的制备与性能研究[D]. 长春:吉林大学,2025. [26] 丁鹏. PMMA/CF预浸料制备及其自阻加热/热压成型工艺研究[D]. 郑州:河南工业大学,2025. [27] 周悦. 碳纤维织物增强聚醚醚酮复合板材制备及热压成型[D]. 武汉:华中科技大学,2024. [28] 王茜. 基于FBG的碳纤维复合材料预应力成型研究[D]. 上海:上海第二工业大学,2024. [29] 彭公秋,钟翔屿,李国丽,等. 两种规格预浸料及其复合材料性能对比研究[J]. 化工新型材料,2021,49(10):146-149. [30] 王勇,段长兵,安传峰. 单向预浸料的碳纤维分布均匀性改善研究[J]. 合成纤维,2020,49(9):36-38. [31] 张旭,齐磊,李镕君,等. 高性能碳纤维复合材料自动铺放技术研究进展[J]. 纤维复合材料,2024,41(4):83-94. [32] 李龙,张茂林,赵伟,等. 热塑性复合材料用混纤预浸料特征[J].玻璃钢/复合材料,2002(3):32-34. [33] 谢艺璇. 碳纤维自动铺放缺陷抑制关键技术研究[D]. 镇江:江苏科技大学,2025. [34] 张新柱. 自动纤维铺放机丝束张力控制系统研究[D]. 石家庄:河北科技大学,2023. [35] Stokes-Griffin C M,Compston P. The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process[J]. Composites Part A:Applied Science and Manufacturing,2015(78):274-283. [36] 王显峰,张育耀,赵聪,等. 复合材料自动铺丝设备研究现状[J]. 航空制造技术,2018,61(14):83-90. [37] 张凤强. 纤维铺放设备中铺丝头的关键技术研究[D]. 哈尔滨:哈尔滨工业大学,2011. [38] Denkena B,Schmidt C,Weber P. Automated fiber place-ment head for manufacturing of innovative aerospace stiffening structures[J]. Procedia Manufacturing,2016(6):96-104. [39] 王磊. 纱架与铺丝头一体化纤维铺放系统研究[D]. 哈尔滨:哈尔滨工业大学,2015 [40] Kiefer B V. Improving laying head technology[J]. Steel Times International,2016,40(4):38. [41] Jegley D. ISAAC Integrated Structural Assembly of Advanced Composites[C]//The Sixth International Symposium on Automated Composites Manufacturing. [S.l.]:[s.n.]. 2024. [42] Kozaczuk. Automated fiber placement technology overview[C]//Contemporary Trends and Innovations in the Textile Industry. [S.l.]:[s.n.]. 2022. [43] 张鹏. 碳纤维预浸带自动铺放轨迹规划与铺放适宜性研究[D]. 武汉:华中科技大学,2016. [44] Bakhshi N, Hojjati M. Influence of compaction rollers on the quality of automated fiber placement[J]. Journal of Reinforced Plastics and Composites,2019,38(10):673-685. [45] Khaled Y, Mehdi H. Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods:A review[J]. Journal of Thermoplastic Composite Materials,2018,31(12):1676-1725 [46] 段玉岗,闫晓丰,李超,等. 压辊材料及形状对纤维铺放压紧效果的影响[J]. 航空学报,2014,35(4):1173-1180. [47] 赵盼,吴博,史耀耀,等. 纤维铺放压辊变形建模与分析[J]. 西北工业大学学报,2021,39(5):1043-1048. [48] 李靖,洪成,郭兵兵,等. 铺放成型工艺参数对复合材料板材弯曲强度和层间剪切强度的影响[J]. 玻璃钢/复合材料,2017(5):72-79. [49] 徐强,舒展,王伟伟,等. 自动铺放红外热源方程的建立与试验验证[J]. 浙江大学学报(工学版),2018,52(7):1376-1389. [50] Islam F, Donough M J, Oromiehie E, et al. Modelling the effect of hot gas torch heating on adjacent tows during automated fibre placement consolidation of thermo-plastic composites[J]. Journal of Thermoplastic Composite Materials,2023,36(10):4211-4236. [51] Elik O, Hosseini S M A, Baran I, et al. The influence of inter-laminar thermal contact resistance on the cooling of material during laser assisted fiber placement[J]. Composites Part A:Applied Science and Manufacturing,2021,145(3):106367. [52] 宋清华,肖军,文立伟,等. 热塑性复合材料自动纤维铺放装备技术[J]. 复合材料学报,2016,33(6):1214-1222. [53] Stokes-Griffin C M,Compston P.An inverse model for optimisation of laser heat flux distributions in an automated laser tape placement process for carbonfibre/PEEK[J]. Composites Part A:Applied Science and Manufacturing,2016(88):190-197. [54] 李品华. 激光辅助铺放系统搭建与铺放过程热流密度分布优化研究[D]. 哈尔滨:哈尔滨工业大学,2023. [55] Brasington A, Sacco C, Halbritter J, et al. Automated fiber placement:A review of history,current technologies,and future paths forward[J]. Composites Part C:Open Access,2021(6):100182 . [56] Li Zhimeng, Yang Tao, Du Yu. Dynamic finite element simulation and transient temperature field analysis in thermoplastic composite tape lay-up process[J]. Journal of Thermoplastic Composite Materials,2015,28(4):558-573. [57] Kollmannsberger A, Lichtinger R, Hohenester F, et al. Numerical analysis of the temperature profile during the laser-assisted automated fiber placement of CFRP tapes with thermoplastic matrix[J]. Journal of Thermo-plastic Composite Materials,2018,31(12):1563-1586. [58] Mattia D F, Laura V, Giuseppe D A, et al. Heater power control for multi-material,variable speed Automated Fibre Placement[J]. Composites Part A:Applied Scienceand Manufacturing,2017(101):408-421. [59] Donough M J, StJohn N A, Philips A W, et al. Process modelling of In-situ consolidated thermoplastic composite by automated fibre placement—A review[J]. Composites Part A:Applied Science and Manufacturing,2022(163):107179. [60] Saenz-Castillo D, Martín M I, Calvo S, et al. Real-time monitoring of thermal history of thermoplastic automatic lamination with FBG sensors and process modelling validation[J]. Smart Materials and Structures,2020,29(11):115004. [61] 赵聪,肖军,王显峰,等. 丝束张力对自动铺丝成型工艺的影响[J]. 航空学报,2016,37(4):1384-1392. [62] 邵忠喜. 纤维铺放装置及其铺放关键技术研究[D]. 哈尔滨:哈尔滨工业大学,2010. [63] 张旭. 自动铺放碳纤维预浸料张力控制与激光跟踪切割技术研究[D]. 济南:山东大学,2023. [64] Harik R,Brasington A. Automated Fiber Placement:Status,Challenges,and Evolution[M]. Warrendale:SAE International,2025. [65] 王东立. 双机器人协同铺放类回转曲面关键技术研究[D]. 南京:南京航空航天大学,2022. [66] 王华侨,郝齐国,王宣鉴,等. 复合材料自动铺丝装备及软件技术的发展现状及挑战[J]. 制造技术与机床,2025(8):60-68. [67] Beaumont K D. Multi-Axis Material Extrusion Additive Ma-nufacturing of Continuous Carbon Fiber Composites[D]. Blacksburg:Virginia Tech,2023. [68] Mimra C,Fox B,Barnard A,et al. Automated evaluation algorithms for online defect detection in carbon fibre tape laying processes:A review[J]. Figshare,2024. [69] Villa-Tiburcio J F,Estrada-Torres J A,Hernández-Alvarado R,et al. ANN Enhanced Hybrid Force/Position Controller of Robot Manipulators for Fiber Placement[J]. Robotics,2024,13(7):1-22. [70] Seneviratne W,Tomblin J,Palliyaguru U. Machine-Learning for Automated Fiber Placement for Manufacturing Efficiency and Process Optimization[C]//Proceedings of the SAMPE 2021 Conference and Exhibition,Online. Diamord: SAMPE,2021. [71] Brüning J,Denkena B,Dittrich M A,et al. Machine learning approach for optimization of automated fiber placement processes[J]. Procedia CIRP,2017(66):74-78. |