Development of control system of fine grinding machine for powder metallurgy parts

doi:10.16731/j.cnki.1671-3133.2018.05.028

Abstract

Abstract: The valve guide grinding feeding machine for large labor intensity,the feeding efficiency is low in the materials,the development of an automatic feeding machine,using PLC control system for automatic control of the feeding process,to achieve continuous cycle of feeding material,in order to improve the efficiency,and can be set by the touch screen different lifting and feeding speed,to meet the different requirements of the feeding time.According to the site commissioning and customer use,PLC control system hardware anti-interference ability,maintenance is simple,reliability improvement.The whole system is of great significance to realize the automatic control of the feeding process,to improve the efficiency and material quality.

Key words: powder metallurgy parts, control system, PLC, servo motor

CLC Number:

TP237

Wu Yanming, Zhu Wenyi, Lan Yi, Jiang Zhengshun. Development of control system of fine grinding machine for powder metallurgy parts[J]. Modern Manufacturing Engineering, 2018, 452(5): 153-155.

[1]	LIU Yu, ZHANG Lei, SHAO Jiangen, LIU Haitao, GU Fengping, ZHANG Yue. Design and control of a staircase cleaning robot with scalable rotating robotic arm [J]. Modern Manufacturing Engineering, 2025, 534(3): 60-68.
[2]	JIAN Yanying, LIU Tingting. Sliding mode control method for dual-axis cradle turntable based on extended state observer [J]. Modern Manufacturing Engineering, 2025, 534(3): 141-149.
[3]	YU Xinlu, WANG Dan, ZHANG Pengqi. Multilayer motor fault-tolerant control algorithm for direct-drive VICTS satellite communication antennas [J]. Modern Manufacturing Engineering, 2024, 525(6): 145-153.
[4]	Yang Zhicheng, Feng Yutao, Sun Lihong, Lin Zhiying, Zhang Lixia. Clearing institutions design and control system of removing debris robot for the high voltage transmission [J]. Modern Manufacturing Engineering, 2018, 456(9): 76-81.
[5]	Yang Yong, Liu Yongjun, Kuang Zizhong. Design of cigarettes inner package defect detection system based on eddy-current sensor [J]. Modern Manufacturing Engineering, 2018, 455(8): 128-133.
[6]	Sun Yiting, Wang Yulin. Numerical control system design of the engine lathe for processing LEBUS grooves [J]. Modern Manufacturing Engineering, 2018, 454(7): 39-42.
[7]	Zhu Jiacheng, Xu Haibo, Li Huigui, Wu Yanming, Jiang Zhengshun, Sheng Wei. The design of control system of unmanned inspection vehicle for overhead contact line [J]. Modern Manufacturing Engineering, 2018, 451(4): 134-137.
[8]	Li Min. Control system of thick plate narrow gap automatic submerged-arc welding machine based on PLC [J]. Modern Manufacturing Engineering, 2018, 451(4): 144-147.
[9]	Guo Linna, Wang Lulu, Gao Zhilai, Zheng Tianchi, Qiu Zixue. Design of assembly machine and its control system for oxygen sensor protective cover-pedestal [J]. Modern Manufacturing Engineering, 2018, 459(12): 141-146.
[10]	Gao Qiang, Liu Wenjie, Li Dong, Wang Yalin, Xue Tao, Liu Mingyuan, Mao Zemin. Application and reasearch of roll position automatic adjustment system based on S7-1500 in the one time forming of cold-formed steel unit [J]. Modern Manufacturing Engineering, 2018, 458(11): 131-135.
[11]	Liu Jiangwen, Zhou Jianming. Design of servo hydraulic PID control system based on least square method [J]. Modern Manufacturing Engineering, 2018, 458(11): 136-141.
[12]	Wang Zhiqiang,Yang Tao,Li Guangyi,Liu Dongdong. Design of coating thickness measurement system for small diameter solid rocket motor [J]. Modern Manufacturing Engineering, 2018, 448(1): 114-118.
[13]	Han Guirong, Chen Xubing. The design of full-automatic handing system of automobile hub based onPLC technology,robot and visual system [J]. Modern Manufacturing Engineering, 2017, 444(9): 52-58.
[14]	Yuan Xiaohui, Cai Yifei. Interference signal processing of pneumatic control system [J]. Modern Manufacturing Engineering, 2017, 444(9): 129-132.
[15]	Qi Jiyang, Liu Yinghao, Meng Yang, Lu Zhenyun, Wei Sai. The seam welder control system based on 485 bus and ZigBee [J]. Modern Manufacturing Engineering, 2017, 443(8): 115-120.

Development of control system of fine grinding machine for powder metallurgy parts

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments