关键词: 3D打印, 微曲面电路, 控制算法, 打印工艺

Abstract: In response to the challenges posed by complex technology and high cost in micro-surface printing circuit,a method for printing micro-curved circuit is proposed using three Degrees of Freedom (3DoF) printer.This method focuses on achieving conformal circuit on micro-surface with the utilization of a 3DoF printer.Additionally,a self-adaption 3D printing control algorithm is also developed.The algorithm takes DXF format files as input,from which it extracts the line data.Subsequently,the data undergoes discrete processing,and each data point is systematically measured.Based on the feedback data,the algorithm then reconstructs the circuit.The final output of the algorithm is in the form of G-code,directly suitable for 3DoF printer.Finally,circuit printing experiments on micro-curved surface prepared from different substrates and lighting experiments are conducted to confirm the feasibility of this approach.Furthermore,the process parameters are also investigated for 3DoF printing micro-curved circuit.By employing a design orthogonal test,the impact of various printing parameters is analyzed,leading to the identification of the optimal parameter combination.The results demonstrated that the best circuit quality is achieved when using a needle diameter of 0.16 mm,a printing air pressure of 0.3 MPa,a printing speed of 100 mm/min,and a printing height of 0.4 mm.Under these conditions,the printed circuit is continuous and uniform,showcasing its superior quality.

Key words: 3D printing, micro surface circuit, control algorithm, printing process