[1] 郭文凤,刘春梅,王云,等. 柔性辊压成形技术及装备发展现状与展望[J]. 现代制造工程,2024(1):151-161. [2] 韩飞,穆思超,李姝. QP980高强钢在辊弯成形中的循环塑性行为和回弹预测[J]. 材料工程,2025,53(9):146-154. [3] 王小聪,薛森森,周韦光,等. 采用参数优化后的Hill′48屈服准则对镁合金V型辊弯成形回弹进行数值模拟研究及实验验证[J]. 稀有金属材料与工程,2025,54(9):2241-2246. [4] 孙庆东,王传红,徐小青,等. O形管辊弯成型有限元仿真与孔形优化设计[J]. 现代制造工程,2016(12):112-116. [5] 李小强,董红瑞,于长旺,等. 不同屈服准则与硬化模型对DP780双相高强钢拉延弯曲回弹预测影响规律研究[J]. 机械工程学报,2020,56(12):42-55. [6] PANICH S. Constitutive modeling of advanced high strength steels characterized by uniaxial and biaxial experiments[J]. Advanced Materials Research, 2013(849):207-211. [7] 郑学斌,韩龙帅,李学涛,等. DP780双相钢u弯回弹预测影响因素研究[J]. 机械工程学报,2024,60(6):197-206. [8] 董伊康,齐建军,孙力,等. 车用钢板材料硬化模型的适用性[J]. 机械工程材料,2020,44(10):81-86. [9] YOSHIDA F, UEMORI T. A model of large-strain cyclic plasticity describing the bauschinger effect and workhardening stagnation[J]. International Journal of Plasticity, 2002, 18(5/6): 661-686. [10] ABVABI A, MENDIGUREN J, ROLFE B F, et al. Springback Investigation in Roll Forming of a V-Section[J]. Applied Mechanics and Materials, 2014(553):643-648. [11] ABVABI A, MENDIGUREN J, KUPKE A, et al. Evolution of elastic modulus in roll forming[J]. International Journal of Material Forming, 2017(543):428-525. [12] 刘晓立,张建邦,黄素霞,等. 超高强钢辊压成形中预冲孔对回弹影响的实验与数值预测[J]. 锻压技术,2023,48(7):71-81. [13] WAGONER R H, LIM H, LEE M G. Advanced issues in springback[J]. International Journal of Plasticity, 2013(45):3-20. [14] HAJBARATI H, ZAJKANI A. A novel finite element simulation of hot stamping process of DP780 steel based on the chaboche thermomechanically hardening model[J]. International Journal of Advanced Manufacturing Technology, 2020, 111(9/10): 2705-2718. [15] LEE J Y, LEE J W, LEE M G, et al. An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending[J]. International Journal of Solids and Structures, 2012, 49(25): 3562-3572. [16] 郑帮智. 汽车梁辊压成形的数值模拟[J]. 锻压技术,2019,44(10):94-100. [17] BOUAZIZ O, ZUROB H, HUANG M. Driving force and logic of development of advanced high strength steels for automotive applications[J]. Steel Research International, 2013, 84(10): 937-947. [18] LIM T, JAIN M. Finite element simulation of the bending and springback behavior of advanced high strength steels (DP780)[R]//SAE Technical Paper No. 2006-01-1339. Warrendate: SAE International,2006. [19] YANG X, CHOI C, SEVER N K, et al. Prediction of springback in air-bending of advanced high strength steel (DP780) considering young′s modulus variation and with a piecewise hardening function[J]. International Journal of Mechanical Sciences, 2016(105):266-272. [20] LEE J, LEE J Y, BARLAT F, et al. Extension of quasi-plastic-elastic approach to incorporate complex plastic flow behavior—application to springback of advanced high-strength steels[J]. International Journal of Plasticity, 2013(45):140-159. [21] SWIFT H W. Plastic instability under plane stress[J]. Journal of the Mechanics and Physics of Solids, 1952, 1(1): 1-18. [22] HOCKETT J, SHERBY O. Large strain deformation of polycrystalline metals at low homologous temperatures[J]. Journal of the Mechanics and Physics of Solids, 1975, 23(2): 87-98. [23] 全国钢标准化技术委员会. 金属材料拉伸试验 第1部分:室温试验方法:GB/T 228.1—2021[S]. 北京:中国标准出版社,2021. [24] TRAUB T, CHEN X, GROCHE P. Experimental and numerical investigation of the bending zone in roll forming[J]. International Journal of Mechanical Sciences, 2017(131/132):956-970. |