现代制造工程 ›› 2026, Vol. 552 ›› Issue (9): 48-58.doi: 10.16731/j.cnki.1671-3133.2026.09.006

• 车辆工程制造技术 • 上一篇    下一篇

碳纤维复合材料B柱加强板设计及优化方法

郭孟宝1, 徐立友1, 张帅1,2, 黄明2   

  1. 1 河南科技大学车辆与交通工程学院,洛阳 471003;
    2 郑州大学工业装备结构分析优化与CAE软件全国重点实验室,郑州 450002
  • 收稿日期:2025-11-25 出版日期:2026-09-18 发布日期:2026-10-22
  • 通讯作者: 徐立友,博士,教授,主要研究方向为车辆新型传动理论与控制技术。E-mail:xlyou@haust.edu.cn
  • 作者简介:郭孟宝,硕士,主要研究方向为汽车轻量化设计与分析。E-mail:13783982207@163.com
  • 基金资助:
    国家自然科学基金项目(52202437);河南省重点研发专项项目(241111241800);工业装备结构分析优化与CAE软件全国重点实验室开放基金项目(GZ2024A03-ZZU)

Design and optimization method of carbon fiber composite B-pillar reinforcement plate

GUO Mengbao1, XU Liyou1, ZHANG Shuai1,2, HUANG Ming2   

  1. 1 School of Vehicle and Traffic Engineering,Henan University of Science and Technology,Luoyang 471003,China;
    2 State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment,Zhengzhou University,Zhengzhou 450002,China
  • Received:2025-11-25 Online:2026-09-18 Published:2026-10-22

摘要: 为提升汽车B柱轻量化水平和抗撞安全性,提出了一种基于碳纤维复合材料(碳纤维增强聚合物)(Carbon Fiber Reinforced Polymer,CFRP)替代高强钢的B柱加强板设计及优化方法。选取高强钢B柱加强板为研究对象,建立了B柱加强板落锤冲击仿真模型,仿真结果显示,系统的沙漏能未超过系统总能量的5 %,验证了所建模型的正确性。结合铺层与成型工艺约束,对CFRP B柱加强板进行了多尺度设计优化(自由尺寸优化、铺层块尺寸优化以及铺层顺序优化)与多目标优化(铺层角度优化、厚度优化)。多尺度设计优化仿真结果表明:CFRP B柱加强板的弯曲模态频率较高强钢提升了2.43 %,扭转模态频率较高强钢提升了3.27 %,质量减少了80.27 %。并通过压模成型工艺的方法制造了碳纤维复合材料B柱加强板样件,将制作的样件进行了自由模态试验结果与仿真结果对比,试验值与仿真值的误差在10 %以内,验证了所设计B柱加强板的正确性。最后,进一步采用响应面(Response Surface Model,RSM)近似模型与改进的多目标粒子群优化(Multi-Objective Particle Swarm Optimization,MOPSO)算法进行多目标优化,选取CFRP B柱加强板的铺层厚度以及4个经典铺层角度作为设计变量,优化后CFRP B柱加强板的弯曲模态频率较高强钢提升了138.90 %,扭转模态频率提升了125.90 %,质量减少了71.43 %。

关键词: CFRP B柱加强板, 抗撞性能, 铺层设计, 多尺度设计优化, 多目标优化, 轻量化

Abstract: To enhance the lightweight level and crash safety of the automotive B-pillar,a design and optimization method for the B-pillar reinforcement plate using Carbon Fiber Reinforced Polymer (CFRP) to replace high-strength steel was proposed. Taking the high-strength steel B-pillar reinforcement plate as the research object,a simulation model for the drop weight impact test of the B-pillar reinforcement plate was established. The simulation results show that the hourglass energy of the system does not exceed 5 % of the total system energy,verifying the correctness of the established model. Combined with the constraints of layup and molding processes,multi-scale design optimization (free-size optimization,laminate block size optimization,and laminate stacking sequence optimization) and multi-objective optimization (layup angle optimization and thickness optimization) were carried out for the CFRP B-pillar reinforcement plate. Multi-scale design optimization simulation results indicate that compared with high-strength steel,the bending mode frequency of the CFRP B-pillar reinforcement plate is increased by 2.43 %,the torsional mode frequency is increased by 3.27 %,and the mass is reduced by 80.27 %. Furthermore,the compression molding process was adopted to manufacture the CFRP B-pillar reinforcement plate specimens. Free modal tests were conducted on the fabricated specimens and compared with the simulation results. The error between the test values and simulation values is within 10 %,which verifies the correctness of the designed B-pillar reinforcement plate. Finally,the Response Surface Model(RSM) approximate model and improved Multi-Objective Particle Swarm Optimization (MOPSO) algorithm were further employed for multi-objective optimization. The layup thickness and four classic layup angles of the CFRP B-pillar reinforcement plate were selected as design variables. After optimization,compared with high-strength steel,the bending mode frequency of the CFRP B-pillar reinforcement plate is increased by 138.90 %,the torsional mode frequency is increased by 125.90 %,and the mass is reduced by 71.43 %.

Key words: CFRP B-pillar reinforcement plate, crashworthiness, layup design, multi-scale design optimization, multi-objective optimization, lightweight

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn