现代制造工程 ›› 2026, Vol. 553 ›› Issue (10): 91-97.doi: 10.16731/j.cnki.1671-3133.2026.10.011

• 车辆工程制造技术 • 上一篇    下一篇

悬架-转向系统耦合的商用车动力学性能协同优化*

马心坦1, 张津源1, 张帅1, 谢俊卿2, 牛玉荣2, 张玉琢1, 冯永超1, 闫奥旗1, 马庆鑫1   

  1. 1 河南科技大学车辆与交通工程学院,洛阳 471003;
    2 豫北转向系统(新乡)股份有限公司,新乡 453000
  • 收稿日期:2025-11-03 出版日期:2026-10-18 发布日期:2026-11-05
  • 通讯作者: 张帅,博士,副教授,主要研究方向为汽车轻量化设计与动力学。E-mail:boreke@126.com
  • 作者简介:马心坦,博士,副教授,主要研究方向为车辆振动噪声控制。
  • 基金资助:
    *河南省重点研发专项项目(241111241800);国家自然科学基金项目(52302408)

Synergistic optimization of dynamic performance of commercial vehicles coupled with suspension-steering system

Ma Xintan1, Zhang Jinyuan1, Zhang Shuai1, Xie Junqing2, Niu Yurong2, Zhang Yuzhuo1, Feng Yongchao1, Yan Aoqi1, Ma Qingxin1   

  1. 1 School of Vehicle and Traffic Engineering,Henan University of Science and Technology,Luoyang 471003,China;
    2 Yubei Steering System (Xinxiang) Co., Ltd., Xinxiang 453000,China
  • Received:2025-11-03 Online:2026-10-18 Published:2026-11-05

摘要: 操纵稳定性和平顺性是车辆重要的动力学性能指标,影响车辆的操控性、乘员安全性及乘坐舒适性等;而这两大性能间又存在复杂的矛盾关系,表现为单一对某项性能的优化设计常会导致另一项性能的降低。为了兼顾商用车底盘性能调控过程中操纵稳定性和平顺性这2个相互矛盾的目标,以某空气悬架城市客车为研究对象,对悬架弹性元件参数及整车关键设计参数进行了优化匹配。综合考虑悬架与转向系统的耦合效应,依据实车参数用Adams/Car软件建立整车动力学模型,结合GB/T 6323—2014对商用车动力学性能进行了仿真分析及样车道路试验,验证了整车动力学模型的准确性;采用最优拉丁超立方法在Isight软件中进行试验设计,建立了优化代理模型,用带精英策略的快速非支配排序遗传算法(Non-dominated Sorting Genetic Algorithm Ⅱ,NSGA-Ⅱ)对整车操纵稳定性和平顺性进行了多目标优化。仿真结果表明,优化后商用车在蛇形工况下横摆角速度峰值和车身侧倾角峰值分别降低了4.9 %和18.1 %,在随机路面工况和脉冲输入工况下垂向振动加速度均方根值分别降低了7.5 %和2.0 %,验证了优化设计方案的有效性,为新能源商用车底盘设计提供了参考方法。

关键词: 商用车, 悬架-转向系统, 操纵稳定性, 平顺性, 多目标优化

Abstract: Handling stability and ride comfort are important dynamic performance indicators of vehicles, which affect the vehicle′s handling ability, occupant safety, and ride comfort, etc. There is a complex contradictory relationship between these two performance indicators, manifested as the optimization design of a single performance often leads to a decrease in the other performance. To balance the two conflicting goals of handling stability and ride comfort during the performance regulation of the commercial vehicle chassis, taking a certain air suspension urban bus as the research object, the parameters of the suspension elastic elements and the key design parameters of the entire vehicle were optimized and matched. Considering the coupling effect of the suspension and the steering system, a vehicle dynamics model was established using the Adams/Car software based on the real vehicle parameters. Combined with the national standard GB/T 6323—2014, the vehicle dynamics performance was simulated and analyzed and the road test of the sample vehicle was conducted to verify the accuracy of the vehicle dynamics model. The optimal Latin hypercube method was used in the Isight software for experimental design, and an optimization surrogate model was established. The fast Non-dominated Sorting Genetic Algorithm Ⅱ (NSGA-Ⅱ) with elite strategy was used to perform multi-objective optimization of the vehicle′s handling stability and ride comfort. The simulation results show that after optimization, the peak value of the lateral sway angle during the vehicle′s S-shaped operation and the peak value of the body roll angle were reduced by 4.9 % and 18.1 % respectively, and the root mean square values of the vertical vibration acceleration in random road conditions and pulse input conditions were reduced by 7.5 % and 2.0 % respectively. This verifies the effectiveness of the optimization design scheme and provides a reference method for the chassis design of new energy commercial vehicles.

Key words: commercial vehicles, suspension-steering system, handling stability, ride comfort, multi-objective optimization

中图分类号: 

版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn