The design and experimental verification of spring strips used in sliding  sleeve valve of injection-production combination

doi:10.16731/j.cnki.1671-3133.2018.01.027

Abstract

Abstract: Spring strip is a key component of sliding sleeve valve used in the injection-production combination technology of heavy oil thermal recovery.It can drive the sliding sleeve movement and achieve the function of open and close of sliding sleeve valve.Using the method of equal effects,spring strip was equivalent to arched beam with both ends fixed.And the mathematical model for maximum deflection of spring strip was deduced based on the superposition principle.The finite element analysis was used to simulate the strength and deformation of spring strip via ABAQUS software to make sure the rationality of the design of spring strip.Did the finite element analysis of various spring strips in the sliding sleeve valve series and compared with calculation results of mathematical model.And then defined the correction factor based on the error magnitude to achieve the optimization of mathematical model.Finally the accuracy of the mathematical model for maximum deflection of spring strip was verified by experiment and which provides the theoretical basis for the design of similar spring strips.

Key words: spring strip, superposition principle, mathematical model of deflection, finite element analysis, correction factor

CLC Number:

Yu Yang,Zhang Yi,Zhao Wei,Dong Xiaobo. The design and experimental verification of spring strips used in sliding sleeve valve of injection-production combination[J]. Modern Manufacturing Engineering, 2018, 448(1): 141-145.

[1]	GU Xu, LI Mingxiang, QIAN Hong, GAO Guansheng, YANG Chunhong, LEI Zhigang. Effect research and prediction of bellows parameters on the wall thickness distribution of TRB pipe bulging V-shaped bellows [J]. Modern Manufacturing Engineering, 2025, 536(5): 115-120.
[2]	LIU Jiayuan, CHENG Xiang, TANG Mingze, ZHENG Guangming. Multi-field coupling analysis of miniature fixed and variable base circle radius involute scroll plates based on ANSYS [J]. Modern Manufacturing Engineering, 2025, 534(3): 77-83.
[3]	LI Lianghui, LI Le, WANG Qian, ZHANG Ximing. A loss prediction model for PMSM based on BP neural network optimizedby dung beetle optimizer [J]. Modern Manufacturing Engineering, 2025, 533(2): 130-137.
[4]	Zhang Airong. Meshing force and finite element analysis of cycloidal gear drive [J]. Modern Manufacturing Engineering, 2019, 460(1): 85-88.
[5]	Li Xiangping, Liu Haicong. Finite element analysis of an unmanned aerial-vehicle wing under compressive loading combined with optical testing [J]. Modern Manufacturing Engineering, 2018, 456(9): 88-93.
[6]	Luo Jing, Chen Yifan, Zhang Genbao, Li Yulong, Wang Zhichao. Reliability optimization and analysis of high speed motorized spindle [J]. Modern Manufacturing Engineering, 2018, 454(7): 93-98.
[7]	You Ying, Chen Di, Wang Jun, Wang Quan, Wei Qiong, You Yufeng. The optimization design of structure for compacting garbage station based on lightweight [J]. Modern Manufacturing Engineering, 2018, 453(6): 44-48.
[8]	Li Wei, Liu Shihao, Guo Zhizhong. Dynamic and static simulation analysis on saddle of hydraulic turbine blade processing machine tool [J]. Modern Manufacturing Engineering, 2018, 453(6): 49-53.
[9]	Wang Xingmin, Wang Xiumei, Luo Linhui, Liu Hongyu, Zhu Linlin. Exploration on spinning forming process of outer ring of self-lubricationspherical plain bearing with integral outer ring [J]. Modern Manufacturing Engineering, 2018, 453(6): 91-95.
[10]	Dong Yongxiang, Si Donghong, Xue Yujun, Li Jishun, Liu Wensheng. Research on multivariable parameterized design method for high-speed and heavy-load bearing housing [J]. Modern Manufacturing Engineering, 2018, 459(12): 82-88.
[11]	Zhan Helin, Zhu Bingbing, Yue Zengzhu, Chen Qingli. The stress analysis of the fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicle with nominal working pressure of 70 Mpa [J]. Modern Manufacturing Engineering, 2018, 459(12): 114-118.
[12]	Ding Tengfei, Zhou Bo, Li Changping, Wang Jiawei. Design and application of automatic feeding device based on hacksawing machine [J]. Modern Manufacturing Engineering, 2018, 457(10): 140-143.
[13]	Liu Yiran, Li Lijun, Sun Zhenyong, Sun Fengshan. Numerical analysis on Helmholtz resonator and metamaterials application [J]. Modern Manufacturing Engineering, 2018, 457(10): 149-154.
[14]	Yang Li, Li Lei. Parameter algorithm and finite element analysis for large cross universal joint [J]. Modern Manufacturing Engineering, 2017, 444(9): 68-73.
[15]	He Guoqi, Wang Qilei, He Ying, Deng Shujie, Sun Neng. Analysis of the stiffness influence factors of face gear tooth based on ANSYS [J]. Modern Manufacturing Engineering, 2017, 443(8): 15-18.

The design and experimental verification of spring strips used in sliding sleeve valve of injection-production combination

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments