Design and research of a combination machining tool for turbine disc mortise groove

doi:10.16731/j.cnki.1671-3133.2024.04.015

Abstract

Abstract: The position of the turbine disc connecting blade of the steam turbine is usually a mortise groove structure. For small dovetail type mortise groove,a molding tool is often used for one-time processing,which leads to low precision of machined parts,poor surface roughness and high tool cost. In order to solve the limitation of the present manufacturing process,a design idea of combined cutting tools was proposed. Firstly,according to the structural characteristics of dovetail type mortise groove,the tool shape line and size parameters of four knives were designed.The model was built by UG modeling software,and the finite element analysis was carried out by ANSYS software. Then the manufacturing process of the combination tool was developed,and the path planning and programming were carried out by NUMROTO tool programming software.Finally,the qualified combined tool was grinded on the SAACKE five-axis tool grinder. Through simulation and practical verification,this scheme is feasible.Compared with traditional machining methods,it has the advantages of high machining accuracy, low surface roughness,low cutting heat and low cost.

Key words: mortise groove, molding tool, shape line, grinding, five-axis grinding machine

CLC Number:

TG723

CHEN Hanyang, TANG Qingchun, YANG Yuhang, LI Xiaoyu, QIAO Peng, ZHOU Lean. Design and research of a combination machining tool for turbine disc mortise groove[J]. Modern Manufacturing Engineering, 2024, 523(4): 109-122.

References

[1] WANG Y,WANG X,ZHONG B,et al.Estimation of fatigue parameters in total strain life equation for powder metallurgy superalloy FGH96 and other metallic materials[J].International Journal of Fatigue,2019,122:116-124.
[2] LI X,GUAN C,ZHAO P.Influences of milling and grinding on machined surface roughness and fatigue behavior of GH4169 superalloy workpieces[J].Chinese Journal of Aeronautics,2018,31(6):1399-1405.
[3] 徐正扬.发动机叶片精密电解加工关键技术研究[D].南京:南京航空航天大学,2008.
[4] 易林峰,吴时盛,李克,等.小尺寸轮盘榫槽拉刀结构参数优化设计研究[J].工具技术,2021,55(6):57-63.
[5] 姜雪梅.高速拉削工艺的研究与应用[J].制造技术与机床,2003(3):42-46.
[6] 于建华,李勋,丁志纯.涡轮盘榫槽加工工艺及变形控制方法研究[J].制造技术与机床,2022(11):144-149.
[7] 秦彬,王子铭,于建华,等.FGH96涡轮盘榫槽成形磨削加工技术研究[J].航空制造技术,2022,65(19):74-79.
[8] 杨涛,曾永彬,杭雨森,等.榫槽结构浸没式管电极内喷液电解切割加工[J].航空学报,2022,43(4):281-291.
[9] 周月香,陈富新,冯燕坪.高精度燃气轮机轮槽的铣削加工[J].热力透平,2007(2):138-140.
[10] 臧笑宇,闫龙,史韵琦.圆弧型榫槽风扇轮盘加工及检测技术研究[J].中国新技术新产品,2012(17):135.
[11] 曹国安.多刃刀具设计中的刀齿数的模糊确定法[J].机械设计与制造,1998(1):25-26.
[12] 刘军库.加工表面粗糙度与切削用量及切削力关系的实验研究[D].湛江:广东海洋大学,2019.
[13] PHOKOBYE S N,DANIYAN I A,TLHABADIRA I,et al.Model Design and Optimization of Carbide Milling Cutter for Milling Operation of M200 Tool Steel [J].Procedia CIRP,2019,84:954-959.
[14] 曾祥录,韩俊峰,朱留宪,等.菌形叶根型线铣刀的三维建模及有限元分析研究[J].机电工程,2019,36(3):284-288.
[15] 曾滔,周志雄,汤爱民,等.碟形砂轮加工刀具螺旋槽的磨削参数研究[J].中国机械工程,2015,26(5):575-580.
[16] 沈志煌,姚斌,张凌,等.铣刀螺旋角的形成及对切削性能的影响[J].机械设计,2014,31(2):69-71,5.
[17] 顾承怡.整体成型铣刀的角度设计[J].木工机床,1981(1):29-32.
[18] SEELBACH T,BEJA L,SCHRAKNEPPER D,et al.Modelling the Geometrical Accuracy for Different Part Geometries and Process Parameters when Broaching Fir-Tree Slots in Turbine Disks[J].Procedia CIRP,2021,102:31-36.