The optimization research of electrolyte of  titanium  alloy pulse electrochemical machining

doi:10.16731/j.cnki.1671-3133.2017.11.020

Modern Manufacturing Engineering ›› 2017, Vol. 446 ›› Issue (11): 110-114.doi: 10.16731/j.cnki.1671-3133.2017.11.020

Previous Articles Next Articles

The optimization research of electrolyte of titanium alloy pulse electrochemical machining

Zhang Chao^1,2, Jing Guangtao¹, Xiang Qingbo¹, Chen Yuanlong¹

1 Institute of Non-Traditional Machining,Hefei University of Technology,Hefei 230009,China;
2 XCMG Excavator Business Division,Xuzhou 221004,Jiangsu,China

Received:2016-07-15 Online:2017-11-20 Published:1900-01-01

Abstract

Abstract: By the titanium passivity,it is susceptible to generate passivation membrane,then prevent an electrochemical machining.Design to create a set of test device,adopts the model of DC,pulse to titanium alloy electrochemical machining for a large number of experiments.According to principle of current efficiency curve and through data processing and analysis,the electrolyte formula that is suitable for titanium alloy electrochemical machining electrolyte is optimizationed.

Key words: titanium alloy, ECM, electrolyte, current efficiency curve

CLC Number:

TG662

Zhang Chao, Jing Guangtao, Xiang Qingbo, Chen Yuanlong. The optimization research of electrolyte of titanium alloy pulse electrochemical machining[J]. Modern Manufacturing Engineering, 2017, 446(11): 110-114.

[1]	WEI Shiyong. Optimization of milling machining parameters and profile measurement for titanium alloy blisks [J]. Modern Manufacturing Engineering, 2025, 536(5): 121-125.
[2]	WANG Zehan, ZHOU Ming, SONG Zixiong, ZHAO Meng, XU Pei, XIN Fangqing. Investigation of the influence law of EDM electrical parameters on the recast layer in titanium alloys [J]. Modern Manufacturing Engineering, 2024, 525(6): 111-121.
[3]	Cheng Cheng, Guo Dongming, Jiang Guannan. Study on electrolyte based on electrochemical characteristics of Monel alloy [J]. Modern Manufacturing Engineering, 2018, 456(9): 108-112.
[4]	Liu Zexiang,Li Shusheng,Dai Qihua. Three-dimensional fluent field simulation on RCUECM [J]. Modern Manufacturing Engineering, 2018, 455(8): 104-108.
[5]	Zhu Huomei,Tu Jingjie,Zheng Lujun,Cen Lizhang,Lai Shangding. Research on the self-guided curved hole processing device and its control system [J]. Modern Manufacturing Engineering, 2018, 448(1): 104-108.
[6]	Chen Bowei, Hu Yahui, Yang Cuilei, Zhang Yang. Secondary development of ABAQUS in the simulation of cutting of titanium alloy [J]. Modern Manufacturing Engineering, 2017, 442(7): 105-108.
[7]	Liu Zhaobo, Lü Yushan, Wang Jun, Wang Xinzheng, Chen Chen. Experimental investigation on the grinding force of the engineered grinding wheel in grinding TC4 [J]. Modern Manufacturing Engineering, 2017, 437(2): 105-108.

The optimization research of electrolyte of titanium alloy pulse electrochemical machining

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 7

Recommended Articles

Metrics

Comments