Design and application of automatic feeding device based on hacksawing machine

doi:10.16731/j.cnki.1671-3133.2018.10.023

Abstract

Abstract: The hacksawing machine has mainly some shortcomings such as low cutting efficiency,low cutting accuracy and great worker’s labor intensity.The automatic feeding device was designed based on hacksawing machine.It has many advantages such as air clamping work,back-up roll supporting work and auto-conveying by stepping motor.The integral structure of automatic feeding was designed,main component was selected.The finite element analysis was adopted to horizontal clamping mechanism,and the rationalization of structural design is validated,then,physical prototype was finished.The feeding result of automatic feeding device met expectations after the tune-up.The design and application of automatic feeding device would also be an important reference value and practical significance for transforming waste equipment.

Key words: hacksawing machine, automatic feeding, finite element analysis, physical prototype

CLC Number:

TH138
TG56

Ding Tengfei, Zhou Bo, Li Changping, Wang Jiawei. Design and application of automatic feeding device based on hacksawing machine[J]. Modern Manufacturing Engineering, 2018, 457(10): 140-143.

[1]	GU Xu, LI Mingxiang, QIAN Hong, GAO Guansheng, YANG Chunhong, LEI Zhigang. Effect research and prediction of bellows parameters on the wall thickness distribution of TRB pipe bulging V-shaped bellows [J]. Modern Manufacturing Engineering, 2025, 536(5): 115-120.
[2]	LIU Jiayuan, CHENG Xiang, TANG Mingze, ZHENG Guangming. Multi-field coupling analysis of miniature fixed and variable base circle radius involute scroll plates based on ANSYS [J]. Modern Manufacturing Engineering, 2025, 534(3): 77-83.
[3]	LI Lianghui, LI Le, WANG Qian, ZHANG Ximing. A loss prediction model for PMSM based on BP neural network optimizedby dung beetle optimizer [J]. Modern Manufacturing Engineering, 2025, 533(2): 130-137.
[4]	Zhang Airong. Meshing force and finite element analysis of cycloidal gear drive [J]. Modern Manufacturing Engineering, 2019, 460(1): 85-88.
[5]	Li Xiangping, Liu Haicong. Finite element analysis of an unmanned aerial-vehicle wing under compressive loading combined with optical testing [J]. Modern Manufacturing Engineering, 2018, 456(9): 88-93.
[6]	Luo Jing, Chen Yifan, Zhang Genbao, Li Yulong, Wang Zhichao. Reliability optimization and analysis of high speed motorized spindle [J]. Modern Manufacturing Engineering, 2018, 454(7): 93-98.
[7]	You Ying, Chen Di, Wang Jun, Wang Quan, Wei Qiong, You Yufeng. The optimization design of structure for compacting garbage station based on lightweight [J]. Modern Manufacturing Engineering, 2018, 453(6): 44-48.
[8]	Li Wei, Liu Shihao, Guo Zhizhong. Dynamic and static simulation analysis on saddle of hydraulic turbine blade processing machine tool [J]. Modern Manufacturing Engineering, 2018, 453(6): 49-53.
[9]	Wang Xingmin, Wang Xiumei, Luo Linhui, Liu Hongyu, Zhu Linlin. Exploration on spinning forming process of outer ring of self-lubricationspherical plain bearing with integral outer ring [J]. Modern Manufacturing Engineering, 2018, 453(6): 91-95.
[10]	Dong Yongxiang, Si Donghong, Xue Yujun, Li Jishun, Liu Wensheng. Research on multivariable parameterized design method for high-speed and heavy-load bearing housing [J]. Modern Manufacturing Engineering, 2018, 459(12): 82-88.
[11]	Zhan Helin, Zhu Bingbing, Yue Zengzhu, Chen Qingli. The stress analysis of the fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicle with nominal working pressure of 70 Mpa [J]. Modern Manufacturing Engineering, 2018, 459(12): 114-118.
[12]	Liu Yiran, Li Lijun, Sun Zhenyong, Sun Fengshan. Numerical analysis on Helmholtz resonator and metamaterials application [J]. Modern Manufacturing Engineering, 2018, 457(10): 149-154.
[13]	Yu Yang,Zhang Yi,Zhao Wei,Dong Xiaobo. The design and experimental verification of spring strips used in sliding sleeve valve of injection-production combination [J]. Modern Manufacturing Engineering, 2018, 448(1): 141-145.
[14]	Chen Guangqing,Ji Deheng,Wang Jidai,Zhang Liang. Research of power coupling mechanism for wave and wind energy complementary generation platform [J]. Modern Manufacturing Engineering, 2018, 448(1): 146-150.
[15]	Yang Li, Li Lei. Parameter algorithm and finite element analysis for large cross universal joint [J]. Modern Manufacturing Engineering, 2017, 444(9): 68-73.

Design and application of automatic feeding device based on hacksawing machine

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments